Condition
For example: DV 200-660-A-b-b-С/C-–-uhl 3.1 TU3631- 426-00217975-2014 , where:
">">>
- D - Delium- a series of pumps
- V - Val location: V- vertical, without designation- horizontal
- 200 -nominal diameter of the output pipe, mm
- 660 -conditional diameter of the working wheel, mm
- A -the execution of the rotor
- B - Wheel cutting: without designation- the main wheel, A, B- the working wheel turning index
- s/s -execution of the case/Wheel Wheel:
Without designation-gray cast iron / gray cast iron
Sh / h-spherical cast iron / gray cast iron
C / s-steel / steel
B / B-Gray cast iron / bronze
N / B-stainless steel / bronze
N / n-stainless steel / stainless steel
D/d - steel duplex/steel duplex
- t -shaft compaction:
Without purpose-an elaboration
T is the end of the single
TS-end with auxiliary
TT - Double end (at the request of the customer)
- e - the performance of the pump (unit) intended for explosive and fire hazardous production
- UHL 3.1 -climatic execution and category of accommodation (U2, T2)
)
Appointment
Series Delium-pumps of a new generation with a bilateral entrance and with a horizontal connector of the case. Delium pumps are created taking into account modern requirements for energy consumption, reliability and long service life. Pump hydraulics are designed using modern computer modeling methods.
A wide range of delumes (& gt; 45) and the use of at least two interchangeable workers The wheels for one body size allows you to choose a pump for any tasks within the feed range from 80 to 10,000 m3/h and the pressure of 5 to 200 m. Work wheels are made in accordance with the requirements of the customer. A high degree of unification of the main parts for various models of pumps significantly reduces the cost of maintenance.
Vertical installation of Delium pumps , as a standard option, is used in technical rooms where horizontal installation is impossible. The vertical installation of the pump also provides engine protection in case of flooding of the machine department.
The characteristics of Delium pumps allow them to operate at Parallel installation and regulate parameters using frequency transducer drives. Pumps can be operated in any climatic conditions with a temperature range from -60 ° C to + 60 ° C .
Stamps (46) , characteristics of Delium pumps (Delium):
Brands
Feed (nomin.), M³/h
Ples, m
Permissible pressure at the input for gray cast iron, kgf/s2
Permissible pressure at the input for steel and ball-visible cast iron, kgf/s2
Power consumed by the pump (max.), KW
Rotation frequency, rpm
Rotation frequency, C˜¹
PPD pump, %
Permissible cavitation reserve, m, no more
D 125-250a
288
16
13.5
22.5
17
1450
24.2
86
1.6
D 125-250b
257
15
13.5
22.5
14
1450
24.2
84
1.7
D 125-320A
316
29
12
22.5
35
1450
24.2
83
1.8
D 125-320b
280
28
12
22.5
29.5
1450
24.2
83
1.6
D 125-400a
315
52
10.5
22.5
63
1450
24.2
82
1.9
D 125-400b
325
52
10.5
22.5
65
1450
24.2
81
1.9
D 125-480a
324
80
7.4
22.5
85
1450
24.2
81
1.7
D 125-480b
297
74
7.4
22.5
82
1450
24.2
79
1.6
D 150-290a
452
21
13.2
22.5
36
1450
24.2
85
1.8
For example: DV 200-660-A-b-b-С/C-–-uhl 3.1 TU3631- 426-00217975-2014 , where:
- ">">>
- D - Delium- a series of pumps
- V - Val location: V- vertical, without designation- horizontal
- 200 -nominal diameter of the output pipe, mm
- 660 -conditional diameter of the working wheel, mm
- A -the execution of the rotor
- B - Wheel cutting: without designation- the main wheel, A, B- the working wheel turning index
- s/s -execution of the case/Wheel Wheel:
Without designation-gray cast iron / gray cast iron
Sh / h-spherical cast iron / gray cast iron
C / s-steel / steel
B / B-Gray cast iron / bronze
N / B-stainless steel / bronze
N / n-stainless steel / stainless steel
D/d - steel duplex/steel duplex - t -shaft compaction:
Without purpose-an elaboration
T is the end of the single
TS-end with auxiliary
TT - Double end (at the request of the customer) - e - the performance of the pump (unit) intended for explosive and fire hazardous production
- UHL 3.1 -climatic execution and category of accommodation (U2, T2) )
Appointment
Series Delium-pumps of a new generation with a bilateral entrance and with a horizontal connector of the case. Delium pumps are created taking into account modern requirements for energy consumption, reliability and long service life. Pump hydraulics are designed using modern computer modeling methods.
A wide range of delumes (& gt; 45) and the use of at least two interchangeable workers The wheels for one body size allows you to choose a pump for any tasks within the feed range from 80 to 10,000 m3/h and the pressure of 5 to 200 m. Work wheels are made in accordance with the requirements of the customer. A high degree of unification of the main parts for various models of pumps significantly reduces the cost of maintenance.
Vertical installation of Delium pumps , as a standard option, is used in technical rooms where horizontal installation is impossible. The vertical installation of the pump also provides engine protection in case of flooding of the machine department.
The characteristics of Delium pumps allow them to operate at Parallel installation and regulate parameters using frequency transducer drives. Pumps can be operated in any climatic conditions with a temperature range from -60 ° C to + 60 ° C .
Stamps (46) , characteristics of Delium pumps (Delium):
Brands
Feed (nomin.), M³/h
Ples, m
Permissible pressure at the input for gray cast iron, kgf/s2
Permissible pressure at the input for steel and ball-visible cast iron, kgf/s2
Power consumed by the pump (max.), KW
Rotation frequency, rpm
Rotation frequency, C˜¹
PPD pump, %
Permissible cavitation reserve, m, no more
D 125-250a
288
16
13.5
22.5
17
1450
24.2
86
1.6
D 125-250b
257
15
13.5
22.5
14
1450
24.2
84
1.7
D 125-320A
316
29
12
22.5
35
1450
24.2
83
1.8
D 125-320b
280
28
12
22.5
29.5
1450
24.2
83
1.6
D 125-400a
315
52
10.5
22.5
63
1450
24.2
82
1.9
D 125-400b
325
52
10.5
22.5
65
1450
24.2
81
1.9
D 125-480a
324
80
7.4
22.5
85
1450
24.2
81
1.7
D 125-480b
297
74
7.4
22.5
82
1450
24.2
79
1.6
D 150-290a
452
21
13.2
22.5
36
1450
24.2
85
1.8
Series Delium-pumps of a new generation with a bilateral entrance and with a horizontal connector of the case. Delium pumps are created taking into account modern requirements for energy consumption, reliability and long service life. Pump hydraulics are designed using modern computer modeling methods.
A wide range of delumes (& gt; 45) and the use of at least two interchangeable workers The wheels for one body size allows you to choose a pump for any tasks within the feed range from 80 to 10,000 m3/h and the pressure of 5 to 200 m. Work wheels are made in accordance with the requirements of the customer. A high degree of unification of the main parts for various models of pumps significantly reduces the cost of maintenance.
Vertical installation of Delium pumps , as a standard option, is used in technical rooms where horizontal installation is impossible. The vertical installation of the pump also provides engine protection in case of flooding of the machine department.
The characteristics of Delium pumps allow them to operate at Parallel installation and regulate parameters using frequency transducer drives. Pumps can be operated in any climatic conditions with a temperature range from -60 ° C to + 60 ° C .
Stamps (46) , characteristics of Delium pumps (Delium):
Brands
Feed (nomin.), M³/h
Ples, m
Permissible pressure at the input for gray cast iron, kgf/s2
Permissible pressure at the input for steel and ball-visible cast iron, kgf/s2
Power consumed by the pump (max.), KW
Rotation frequency, rpm
Rotation frequency, C˜¹
PPD pump, %
Permissible cavitation reserve, m, no more
D 125-250a
288
16
13.5
22.5
17
1450
24.2
86
1.6
D 125-250b
257
15
13.5
22.5
14
1450
24.2
84
1.7
D 125-320A
316
29
12
22.5
35
1450
24.2
83
1.8
D 125-320b
280
28
12
22.5
29.5
1450
24.2
83
1.6
D 125-400a
315
52
10.5
22.5
63
1450
24.2
82
1.9
D 125-400b
325
52
10.5
22.5
65
1450
24.2
81
1.9
D 125-480a
324
80
7.4
22.5
85
1450
24.2
81
1.7
D 125-480b
297
74
7.4
22.5
82
1450
24.2
79
1.6
D 150-290a
452
21
13.2
22.5
36
1450
24.2
85
1.8
| Brands | Feed (nomin.), M³/h | Ples, m | Permissible pressure at the input for gray cast iron, kgf/s2 | Permissible pressure at the input for steel and ball-visible cast iron, kgf/s2 | Power consumed by the pump (max.), KW | Rotation frequency, rpm | Rotation frequency, C˜¹ | PPD pump, % | Permissible cavitation reserve, m, no more |
|
D 125-250a
|
288 | 16 | 13.5 | 22.5 | 17 | 1450 | 24.2 | 86 | 1.6 |
|
D 125-250b
|
257 | 15 | 13.5 | 22.5 | 14 | 1450 | 24.2 | 84 | 1.7 |
|
D 125-320A
|
316 | 29 | 12 | 22.5 | 35 | 1450 | 24.2 | 83 | 1.8 |
|
D 125-320b
|
280 | 28 | 12 | 22.5 | 29.5 | 1450 | 24.2 | 83 | 1.6 |
|
D 125-400a
|
315 | 52 | 10.5 | 22.5 | 63 | 1450 | 24.2 | 82 | 1.9 |
|
D 125-400b
|
325 | 52 | 10.5 | 22.5 | 65 | 1450 | 24.2 | 81 | 1.9 |
|
D 125-480a
|
324 | 80 | 7.4 | 22.5 | 85 | 1450 | 24.2 | 81 | 1.7 |
|
D 125-480b
|
297 | 74 | 7.4 | 22.5 | 82 | 1450 | 24.2 | 79 | 1.6 |
|
D 150-290a
|
452 | 21 | 13.2 | 22.5 | 36 | 1450 | 24.2 | 85 | 1.8 |
|
|
