One-stage spiral pump for vertical installation In closed tanks under atmospheric pressure with nominal characteristics EN 733. Suitable for immersion depth of up to 2000 mm.
Review of technical data
q (50 Hz)
3.0-740.0 (m³ / h)
h (50 Hz)
1.5-100.0 (m)
type of bearing
rolling bearings
partition
radially split
drive frequency
50 Hz/60 Hz < /span>
type of drive
Electric engine
drive voltage
Low voltage
the number of recordings of the working wheel
single < /span>
maximum immersion
2000.0 (mm)
Workpoint material (EN standard)
1.4408 / A743 GR CF8 M, EN-GJL-250 / A 48 CL 35b
type of adhesion
direct /span>
type of lubricant
consistent lubricant
maximum. The permissible fluid temperature < /span>
95.0 (° С)
the position of the nozzle
variable /span>
maximum working pressure
Pn 10, Pn 16 /span>
the location of the pump unit
wet well
shaft material (standard EN)
1.4462, C45 + N
standard
En 733
absorption characteristics
non-grouping
upper plate
yes /span>
type of case
Volunte < /span>
type of working wheel
radial, closed
type of connection
Flaint /span>
body material (standard EN)
1.4408 / A743GR CF8 M, EN-GJL-250 / A 48 CL 35b
purpose eclass
36410101, 036410100 < /span>
installation position
Vertical < /span>
type of shaft seal
The shaft sealing ring
main applications
Industrial and technological engineering, wastewater / wastewater
body material
Cast iron, stainless steel
maximum pressure on the injection side
10.0 (bar)
maximum drive rating
90.0 (kW)
type of installation
Stationary < /span>
maximum rotation speed
3500.0 (1/ min)
| q (50 Hz) | 3.0-740.0 (m³ / h) |
| h (50 Hz) | 1.5-100.0 (m) |
| type of bearing | rolling bearings |
| partition | radially split |
| drive frequency | 50 Hz/60 Hz < /span> |
| type of drive | Electric engine |
| drive voltage | Low voltage |
| the number of recordings of the working wheel | single < /span> |
| maximum immersion | 2000.0 (mm) |
| Workpoint material (EN standard) | 1.4408 / A743 GR CF8 M, EN-GJL-250 / A 48 CL 35b |
| type of adhesion | direct /span> |
| type of lubricant | consistent lubricant |
| maximum. The permissible fluid temperature < /span> | 95.0 (° С) |
| the position of the nozzle | variable /span> |
| maximum working pressure | Pn 10, Pn 16 /span> |
| the location of the pump unit | wet well |
| shaft material (standard EN) | 1.4462, C45 + N |
| standard | En 733 |
| absorption characteristics | non-grouping |
| upper plate | yes /span> |
| type of case | Volunte < /span> |
| type of working wheel | radial, closed |
| type of connection | Flaint /span> |
| body material (standard EN) | 1.4408 / A743GR CF8 M, EN-GJL-250 / A 48 CL 35b |
| purpose eclass | 36410101, 036410100 < /span> |
| installation position | Vertical < /span> |
| type of shaft seal | The shaft sealing ring |
| main applications | Industrial and technological engineering, wastewater / wastewater |
| body material | Cast iron, stainless steel |
| maximum pressure on the injection side | 10.0 (bar) |
| maximum drive rating | 90.0 (kW) |
| type of installation | Stationary < /span> |
| maximum rotation speed | 3500.0 (1/ min) |
