Vacuum rotational pump of the VP type is designed to pump out air from the housing and absorbing the pump pipeline until they are launched, as well as to obtain and support a certain discharge in various devices and installations. "Color: RGB (58, 110, 165); Font-Family: Arial, Helvetica, Sans-Serif; Font-Size: Medium; Text-align: Justify;" />
Equipped gases and liquid-gaping mixtures should be frustrated, chemically inactive and clean from mechanical impurities.
The row consists of sizes with a nominal feed of 6.16 and 40 l/s, with a vacuum of 500 mm Hg. The maximum vacuum with zero feed is 8.5-9.5m.
The pumps are driven by three-phase electric motors with a voltage of 380 V and a frequency of 50 Hz. When agreement with the client, they can be made with a different voltage and frequency, as well as in the tropical version.
The seal of the pump of the pump 6VP is carried out by means of a rubber cuff; Pumps 16VP and 40VP - by means of an oil seal with a soft stuffing. Cooling and compaction of the oil seal is carried out using water under pressure via a vacuum pump water ring.
To support and cool the water ring, it is necessary to supply drinking water under a pressure of 2 - 5 m.
The absorption and discharge flanges are directed vertically upwards. The absorption flange of 6VP and 40VP vacuum pumps is located on the left, if you look from the vacuum pump.
Type of pump
n = 1450 min -1
n = 2900 min -1
Submission
Vacuum
Submission
Vacuum
L/S
m
L/S
m
6VP
6
6.8
16VP
16
6.8
40VP
40
6.8
