Divac1, 4 HV3c --< /span> Chemical exposure to a three -stage membrane pump with improved characteristics. The speed of the pump can be smoothly adjusted from 700 to 1600 rpm, so the speed of action of the pump can easily vary depending on the requirements. The built -in structured membrane is made from EPDM (ethylene propylene monomer) and covered with a layer of ptfe (fluoroplast). The valves are made of Karlez material, which provides excellent resistance in contact with aggressive gases. Thanks to a three -stage design, a pressure of 2 mbar can be achieved.
|
Name of the parameter |
Meaning |
|
1 entrance flange |
G 1/8 ’’ for olive du 10mm |
|
2 output flanet |
G 1/8 ’’ under the olive Du10mm |
|
3 speed of action, m 3 /h |
1.3 |
|
4 maximum residual pressure, MBAR (mm Hg) |
≤ 2 (≤ 1.5) |
|
5 maximum exhaust pressure, mbar |
1500 |
|
6 noise level, dB |
48 |
|
7 ELECTION EL/DOWN. From a network of single -phase alternating current with a frequency of 50/60 Hz, voltage, in |
from 90 to 230 |
|
8 power of the electric motor, W |
120 |
|
9 angular speed, rpm |
700 - 1600 |
|
10 degree of protection of the electric motor |
IP 20 |
|
11 Permissible gas temperature at the input, o s |
+5 to +40 |
|
12 Permissible ambient temperature, o s |
+5 to +40 |
|
13 mass, kg |
12.6 |
