Single -navy pumps Burun N1V
Electric pump size
Energy Parameters, B, Hz
Pump pressure (RMAX), MPa (KGS/cm²)
Submissions at a pressure of 0 MPa, m³/h
Submissions, at a pressure of the pump p max, m³/h
The limit viscosity, MPa • C
current, and
Engine
Mass, kg, no more than
Nomin. Power, kW
Synchronous speed, with -1 (rpm.)
N1B 2.5/2-220 Burun ®
1 ~ 220, 50
0.25 (2.5)
3.6
1.2
1000
3.7
0.55
50 (3000)
12.5
N1V 2.5/2-380 Burun ®
3 ~ 380, 50
0.25 (2.5)
3.6
1.2
1000
1.8
0.75
50 (3000)
12.2
Condition
Burun® N1V 2.5 / 2-220 , where: where:
-
Burun®- A series of uniform electric pumps ;
-
N1V - constructive execution H1B - self -digging drainage;
-
2.5 - nominal feed, m³/h;
-
2 - pressure on the output of the pump, kgf/cm²
-
220-voltage of the supply network, in .
Burun® N1V series -a portable self-consistent drainage pump . Corps parts are made of aluminum and high-strength plastic. Val seal - a standard reinforced easily replaced cuff. The pump can be used both for irrigation, cleaning various containers, in technological processes, except for drinking water supply, as well as in industry for pumping water and heterogeneous non -aggressive liquids with mechanical impurities and viscosity up to 1000 joint ventures. The main purpose is to clean the sloppers and cesspools, watering and irrigation of garden plots.
pumped liquid
Single monster monoblock pumps of the Burun® series are designed to pump both pure water and heterogeneous liquids and suspension up to 1000 joint ventures and a temperature of up to 35 ° C when working in continuous mode and temperature up to 70 ° C during periodicals of operation. Depending on the necessary supply or viscosity of the pumped fluid, the pumps are equipped with three -phase engines with a rotation frequency of 3000 and 1500 rpm for a voltage of 380V and single -phase engines with a rotation frequency of 3000 and 1500 rpm.
Advantages of the pumps of the Burun series
The advantage of screw pumps over centrifugs is the created uniform non -pulsating flow of pumped fluid. This allows you not to mix the liquid and preserve its structures. -high ability to self -consuming; -Prota of the structure that ensures the convenience of maintaining the pump. The pump consists of three main parts: stainless screw, rubber clip and shaft seal; -The pumping of the pump is proportional to the speed of rotation. This allows you to easily adjust the pump parameters in the presence of a frequency drive; -The high pressure of the pump with a small dimensions is provided by the design of the clip with a self -regulating clearance. The gap between the working surface of the screw and the clips remains constant with an increase in pressure.
Motor
Power kW
30
Frequency rpm
1000
| Electric pump size | Energy Parameters, B, Hz | Pump pressure (RMAX), MPa (KGS/cm²) | Submissions at a pressure of 0 MPa, m³/h | Submissions, at a pressure of the pump p max, m³/h | The limit viscosity, MPa • C | current, and | Engine | Mass, kg, no more than | |
| Nomin. Power, kW | Synchronous speed, with -1 (rpm.) | ||||||||
| N1B 2.5/2-220 Burun ® | 1 ~ 220, 50 | 0.25 (2.5) | 3.6 | 1.2 | 1000 | 3.7 | 0.55 | 50 (3000) | 12.5 |
| N1V 2.5/2-380 Burun ® | 3 ~ 380, 50 | 0.25 (2.5) | 3.6 | 1.2 | 1000 | 1.8 | 0.75 | 50 (3000) | 12.2 |
| Motor | |
| Power kW | 30 |
| Frequency rpm | 1000 |
