Vertical pump with a tubular case, with a diagonal workplace, a single -stage, with a system of bearings from the Residur® material that does not require service. The pressure pipe is located above or under the floor level. Scope: for pumping unpeeled and clean water, in water -free and water -free pumping stations, for water protection and preventing emergency situations, for pumping cooling water at power plants and industry.
Review of technical data
q (50hz)
720.0-6 500 , 0 (m³/h)
h (50hz)
5.0-60, 0 (m)
type of bearing
Sliding Upper
separation of the case
transverse (radial)
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
low voltage, high voltage < /span>
the number of inputs of the working wheel
single-flow < /span>
type of installation
supporting
type of coupling
directly < /span>
type of lubricant
lubrication of the pumped environment
max. Permissible fluid temperature
60.0 (° C) /span>
the absence of silicon is guaranteed
yes < /span>
maximal working pressure
Pn 6 < /span>
installation of the unit
"Wet" installations
characteristics on absorption
Nonamovy. /span>
permissible for drinking water
yes < /span>
type of case
Tubular Corps
type of working wheel
Closed, open, diagonal worker Wheel
type of accession
flanet < /span>
eclass
36410100, 36410106, 36410000 < /span>
installation position
vertical < /span>
type of shaft seal
Salnic stuffing
the main areas of application
Water supply, energy
body material
chromnickel steel, carbon steel, carbon steel, carbon steel Duplex steel
max. Working pressure on the pressure sides
10.0 (BAR)
max. Driving power
800.0 (KW)
type of installation
stationary < /span>
max. rotation frequency
1500.0 (1/min)
| q (50hz) | 720.0-6 500 , 0 (m³/h) |
| h (50hz) | 5.0-60, 0 (m) |
| type of bearing | Sliding Upper |
| separation of the case | transverse (radial) |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | low voltage, high voltage < /span> |
| the number of inputs of the working wheel | single-flow < /span> |
| type of installation | supporting |
| type of coupling | directly < /span> |
| type of lubricant | lubrication of the pumped environment |
| max. Permissible fluid temperature | 60.0 (° C) /span> |
| the absence of silicon is guaranteed | yes < /span> |
| maximal working pressure | Pn 6 < /span> |
| installation of the unit | "Wet" installations |
| characteristics on absorption | Nonamovy. /span> |
| permissible for drinking water | yes < /span> |
| type of case | Tubular Corps |
| type of working wheel | Closed, open, diagonal worker Wheel |
| type of accession | flanet < /span> |
| eclass | 36410100, 36410106, 36410000 < /span> |
| installation position | vertical < /span> |
| type of shaft seal | Salnic stuffing |
| the main areas of application | Water supply, energy |
| body material | chromnickel steel, carbon steel, carbon steel, carbon steel Duplex steel |
| max. Working pressure on the pressure sides | 10.0 (BAR) |
| max. Driving power | 800.0 (KW) |
| type of installation | stationary < /span> |
| max. rotation frequency | 1500.0 (1/min) |
