Vertical pump with a tubular case, With an open diagonal work wheel, one- or two-stage. The absorption of the choice with a nozzle or knee, the process is possible, the pressure pipe is located above or under the floor level, flanges on DIN or ANSI are possible. Scope: for pumping unpeeled, clean, technical and cooling water, in industry, water supply, at power plants and installations for desalch for sea water.
Review of technical data
q (50hz)
5 000.0-65 000.0 (m³/h)
h (50hz)
7.0-33, 0 (m)
type of bearing
Linging bearing and sliding undergrowth < /span>
separation of the case
transverse (radial)
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
low voltage, high voltage < /span>
the number of inputs of the working wheel
Single-flow < /span>
type of installation
supporting
type of coupling
Reducer, directly
type of lubricant
Oil lubricant/lubricant of the pumped environment
max. Permissible fluid temperature
40.0 (° C) /span>
maximal working pressure
Pn 6, Pn 9 < /span>
installation of the unit
">"> ">"> " Wet "Installations
characteristics on absorption
Nonamovy. /span>
type of case
Tubular case
type of working wheel
Diagonal Workword, open < /span>
type of accession
Fill < /span>
eclass
36410100, 36410000, 36410106 < /span>
installation position
Vertical < /span>
type of shaft seal
end seal, oilcopodics < /span>
the main areas of application
energy, water supply, industry and industry Technological processes
body material
carbon steel, chromnickel steel, chrome-nickel steel Duplex steel
max. Working pressure on the pressure sides
9.0 (Bar)
max. Driving power
5000.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
990.0 (1/min)
| q (50hz) | 5 000.0-65 000.0 (m³/h) |
| h (50hz) | 7.0-33, 0 (m) |
| type of bearing | Linging bearing and sliding undergrowth < /span> |
| separation of the case | transverse (radial) |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | low voltage, high voltage < /span> |
| the number of inputs of the working wheel | Single-flow < /span> |
| type of installation | supporting |
| type of coupling | Reducer, directly |
| type of lubricant | Oil lubricant/lubricant of the pumped environment |
| max. Permissible fluid temperature | 40.0 (° C) /span> |
| maximal working pressure | Pn 6, Pn 9 < /span> |
| installation of the unit | ">"> ">"> " Wet "Installations |
| characteristics on absorption | Nonamovy. /span> |
| type of case | Tubular case |
| type of working wheel | Diagonal Workword, open < /span> |
| type of accession | Fill < /span> |
| eclass | 36410100, 36410000, 36410106 < /span> |
| installation position | Vertical < /span> |
| type of shaft seal | end seal, oilcopodics < /span> |
| the main areas of application | energy, water supply, industry and industry Technological processes |
| body material | carbon steel, chromnickel steel, chrome-nickel steel Duplex steel |
| max. Working pressure on the pressure sides | 9.0 (Bar) |
| max. Driving power | 5000.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 990.0 (1/min) |
