NMU pump

NMU pump

The universal milk pump is designed for pumping milk, water, detergents and disinfecting liquids on milking installations, where liquids do not contain abrasive impurities, have a temperature of not more than +750C and viscosity of not more than 4 centipuasis.
The pump provides pumping fluid from the vacuum system and open container.

The pump is available in two performance:
NMU - 6 with a plastic case;
NMU - 6 A with a stainless steel case;

The pump is designed for operation in a closed room under the following conditions:

  • Temperature from +50C to +400C;
  • Relative humidity, no more than 85 %.

Technical characteristics

The NMU-10A pump is designed to pump liquid foods (milk, drinks, cream, wine, melange, mayonnaise, juices, etc.), water, disinfectants, detergents and other non-abrasive liquids similar in terms of viscosity and chemical activity no more than 90 ° C. Only those tools that are designed to flush milking installations are used as detergents and disinfectants.

  • The temperature in the working room is from +5 ° C to +35 ° C & nbsp;
  • Relative humidity of not more than 85%& nbsp;
  • The temperature of detergents and disinfectants is not more than +65 ° С & nbsp;
  • Network voltage fluctuations +10%

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

Submission, (l \ sec (dm. Kub. \ Hour):
At atmospheric pressure
At the entrance and at the pressure of the pump
130kp, pressure 13.2 ± 0.2m

1.9 (6500)

at vacuummeteric pressure
At the entrance of 50 kPa and pump pressure
120kp, pressure 12.2 ± 0.2m

1.0 (3600)

The outer diameter of the suction
Pipe, (mm)

40

The outer diameter of the injection
Pipe, (mm)

22

Nominal power
electric motor, (kW)

0.75

The mass of the pump, (kg)

12.5

Dimensions
Dimensions, (mm)

390x275x200