Laboratory homogenizer GM0.2/25LD

Laboratory homogenizer GM0.2/25LD

laboratory homogenizer GM0.2/25LD

The installation is a mobile finished unit for the pilot and pre-production studies of the homogenization process in various production workshops, laboratories and various products.

Designed for high pressure of milk, cream, cottage cheese and cheese products, other dairy products, as well as juices with pulp, fruit and vegetable puree. Homogenizers are used in the production of viscous lubricants, automasals and other lubricants.

The laboratory homogenizer GM0.2/25LD includes:

• Plunger homogenizer of a valve type of low performance (200l/hour) GM0.2/25LD
• The supply pump-based on the unit of the electric pumped SHNK15-2 (NRM-2) -M1,
• Bunker for a product with a volume of 50 liters.
• control panel
• Installation is installed on a single frame with rollers for moving along the workshop.

Advantages of the laboratory homogenizer GM0.2/25LD:

• Autonomy and the possibility of testing and research of the homogenization process in various production workshops and on various products • Smooth pressure adjustment from 0 to 20 MPa (200 bar).
• In the homogenizer hydrogenic hydrogen, special ball intake and exhaust valves are used, which allows you to pump products with increased viscosity, fat content and the content of dry valves without loss of productivity and the absence of the valve freezing effect

Technical characteristics Laboratory homogenizer GM-0.2/25LD:

Supply of the laboratory homogenizer GM0.2/25LD:

Homogenizer model GM0.2/25LD
Performance 200 liters per hour
Working pressure 20 MPa (200 atm)
Recommended product temperature +70 0 with ± 5 0 s
The number of double passages of plunger per minute 194
Homogenizing node 2-step with manual control
Number of plunger 3
The power of the Homogenizer electric motor 2.2 kW
Power of the electric motor of the supply pump 1.1 kW
Voltage 380v
Frequency 50Hz
Water consumption for cooling plunger no more than 100 liters per hour
Noise level no more than 70 dB
Entrance to the homogenizer DU35
Homogenizer exit DU35
Dimensional dimensions 1300 x 880 x 1080 mm
Weight 430 kg

The overall dimensions of the laboratory homogenizer GM0.2/25LD (200 liters per hour). Homogenizer for milk, juice homogenizer, ice cream homogenizer, homogenizer for food, homogenizer for plastic lubricants

1.1. Homogenizing head 1.2. The first stage 1.3. Second stage 1.4. The output of the product DU35 1.5. Pressure sensor 1.6. Electrode 1.7. Coolating fluid diameter 1.8. Coolating fluid sliding fluid diameter 2.1. Coming the grocery pump SNK15-2 (NRM-2) -M1 2.2. Bunker 2.3. Baypass with a regulation of 2.4. 2.5. Invention to a homogenizer 3. Rama

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

1 Homogenizer GM0.2l/20MD with a two -stage homogenizing node with manual control 1 pcs
1.1 Forced cooling system of plunger
1.2 Enjoyant system of lubrication of the drive mechanism
1.3 Electric pressure sensor with a built -in pulsation quencher (Fig. 3) and a digital pressure indicator
1.4 The MOMOGenizer control panel (turning on/off the homogenizer, indication of the operating mode, automatic blocking of the starting of the homogenizer at low water supply for cooling, when overheating of oil, meters meter) is built (Fig. 5)
1.5 the supply pump-SHN15-2 (NRM-2) -M1
1.6 Bunker for a product of 100 liters
2 Passport GM0.2/25LDPS 1 pcs
3 Passport for a pressure sensor 1 pcs