Momogenizer GM5,0 /20MD (5000 liters Hour) - Homogenizer Plunger high -pressure.
Designed for high pressure of milk, cream, cottage cheese and cheese products, other dairy products, as well as juices with pulp, fruit and vegetable puree. Homogenizers are used in the production of viscous lubricants, automasals and other lubricants.
Advantages of the homogenizer GM5.0/20MD (5000 liters hour):
• Smooth pressure adjustment from 0 to 20 MPa (200 bar)
• In the homogenizer hydrogenic hydrogenic hydrogen, special conical and exhaust valves are used (Fig. 3), which allows you to pump products with increased viscosity, fat content and the content of dry valves without loss of productivity and the absence of valve freezing
• A special design of plunger fastening has been applied, which can significantly increase the service life of plunger compaction cuffs
• A closed cooling system of plunger, which allows you to improve the removal of heat
• A special electric pressure sensor with a built -in pulsation quencher (Fig. 4) and a digital pressure indicator
• Motor -counter counter (Fig. 5)
• Sensor of the presence of plunger cooling fluid
• Low noise and vibration level due to small speeds of the crankshaft
• An original lubricant system that reduces the cost of maintaining a homogenizer
• increased service life due to the interchange of plunger.
the area of use of the homogenizer GM5.0/20MD:
- Homogenizer for milk
- Homogenizer for cream
- homogenizer for sour cream
- homogenizer for cottage cheese
- a homogenizer for a cheese product
- homogenizer for condensed milk
- Homogenizer for juice
- Momogenizer for mashed potatoes
- Homogenizer for lubricant
Technical characteristics homogenizer GM5.0/20MD (5000 liters hour) :
| Homogenizer model | GM5.0/20MD | |
| Performance | 5,000 liters per hour | |
| Working pressure | 20 MPa (200 atm) | |
| Recommended product temperature | +70 0 with ± 5 0 s | |
| The number of double passages of plunger per minute | 200 | |
| Homogenizing node | 2-step manual control or pneumo-game control | |
| Number of plunger | 3 | |
| Electric motor power | 37 kW | |
| Voltage | 380v | |
| Frequency | 50Hz | |
| Water consumption for cooling plunger | no more than 500 liters per hour | |
| Noise level | no more than 70 dB | |
| Entrance to the homogenizer | D50 | |
| Homogenizer exit D50 | ||
| Dimensional dimensions | 1 400x 1 128 x 1627 mm | |
| Weight | 1 250 kg |
| 1 | Homogenizer GM-5.0/20MD with a two-stage homogenizing node with manual control | 1 pcs |
| 1.1 | Forced cooling system of plunger | |
| 1.2 | Enjoyant system of lubrication of the drive mechanism | |
| 1.3 | Electric pressure sensor with a built -in pulsation quencher (Fig. 3) and a digital pressure indicator | |
| 1.4 | The MOMOGenizer control panel (turning on/off the homogenizer, indication of the operating mode, automatic blocking of the starting of the homogenizer at low water supply for cooling, when overheating of oil, meters meter) is built (Fig. 5) | |
| 1.5 | Stainless steel cladding 12x18n10t | |
| 2 | Passport GM-5.0/20m.PS | 1 pcs |
| 3 | Passport for a pressure sensor | 1 pcs |
| 4 | Operation Guide to the Motor Motor Motors SM-03 | 1 pcs |
| 5 | Canister with I-50A oil, 10l | 3 pcs |
| 6 | Anth -humorous headphones like 1440 | 1 pcs |
| 7 | ZIP standard | 1 kt |
| Option . Demepfer Pulsation - KGM5.0-000 compensator (see Fig. 6) | 2 pcs | |
| Option . Manometer (0 ... 10 ATM) with a DN50 dividing membrane + Settled trifier DN50. Product input pressure control | 1 pcs |
