Description < /span>
Vertical submersible pump with a spiral case , a mesh filter on absorption and a three -channel working wheel.
Scope
for pumping condensation and cohesive heaters below Boiling points, condensate return devices, primary and secondary contours of heating systems, direct installation in heating chambers or heat exchangers of the secondary circuit circulation (Mky).
Review of technical data
q (50hz)
2.0-36, 0 (m³/h)
h (50hz)
0.5-19, 19, 19, 19, 19, 19, 19 0 (m)
type of bearing
Linging bearing and sliding undergrowth < /span>
separation of the case
transverse (radial)
drive
Elector < /span>
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
Low voltage
electric connector
230/400 V, 3 ~
explosion protection
Exx e II, Eex dee II
the number of inputs of the working wheel
Single-flow < /span>
max. Destation depth
2800.0 (mm)
work wheel material (according to the standard E
CC480K-GS, 1.4408, JL 1040
type of coupling
directly < /span>
type of lubricant
consistent lubrication/lubricant of the pumped environment
max. Permissible fluid temperature
200.0 (° C) /span>
Pack of the pipe
Variant < /span>
maximal working pressure
Pn 6
installation of the unit
"Wet" installations
shaft material (according to the standard EN)
1.4021.05, 1.4571 < /span>
characteristics on absorption
Nonamovy. /span>
Tear stove
Yes < /span>
type of case
Spiral Corps
type of working wheel
Radial, three-channel working wheel, Closed
type of accession
Carving, flanet
classification UNSPSC
4015150300 < /span>
body material (according to the standard EN)
C480K-GS, JL 1040 , 1.4408
eclass
36410000, 36410100, 36410103 < /span>
max. Free passage
18.0 (mm)
installation position
Vertical < /span>
type of shaft seal
Highlights of the shaft
the main areas of application
industry and technological processes, water supply , wastewater
body material
Stainless, Bronze, Gray cast iron
max. Working pressure on the pressure sides
6.0 (Bar)
max. Driving power
3.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
3500.0 (1/min)
& nbsp;
| q (50hz) | 2.0-36, 0 (m³/h) |
| h (50hz) | 0.5-19, 19, 19, 19, 19, 19, 19 0 (m) |
| type of bearing | Linging bearing and sliding undergrowth < /span> |
| separation of the case | transverse (radial) |
| drive | Elector < /span> |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | Low voltage |
| electric connector | 230/400 V, 3 ~ |
| explosion protection | Exx e II, Eex dee II |
| the number of inputs of the working wheel | Single-flow < /span> |
| max. Destation depth | 2800.0 (mm) |
| work wheel material (according to the standard E | CC480K-GS, 1.4408, JL 1040 |
| type of coupling | directly < /span> |
| type of lubricant | consistent lubrication/lubricant of the pumped environment |
| max. Permissible fluid temperature | 200.0 (° C) /span> |
| Pack of the pipe | Variant < /span> |
| maximal working pressure | Pn 6 |
| installation of the unit | "Wet" installations |
| shaft material (according to the standard EN) | 1.4021.05, 1.4571 < /span> |
| characteristics on absorption | Nonamovy. /span> |
| Tear stove | Yes < /span> |
| type of case | Spiral Corps |
| type of working wheel | Radial, three-channel working wheel, Closed |
| type of accession | Carving, flanet |
| classification UNSPSC | 4015150300 < /span> |
| body material (according to the standard EN) | C480K-GS, JL 1040 , 1.4408 |
| eclass | 36410000, 36410100, 36410103 < /span> |
| max. Free passage | 18.0 (mm) |
| installation position | Vertical < /span> |
| type of shaft seal | Highlights of the shaft |
| the main areas of application | industry and technological processes, water supply , wastewater |
| body material | Stainless, Bronze, Gray cast iron |
| max. Working pressure on the pressure sides | 6.0 (Bar) |
| max. Driving power | 3.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 3500.0 (1/min) |
