Light and reliable submersible Cast iron pumps . There are two different hydraulic versions:
- Dreno (Dre) multi -channel open impeller for clean or slightly contaminated water
- Draga (DGE) with Vortex impeller and large free passage for contaminated water.
compact dimensions both horizontal and vertical pressure nozzles allow any installation, even on existing systems or in small-sized wells.
Each model is subjected to pressure under pressure to guarantee the impeccability of installation and operation of seals, cable couplings and mechanical seals.
Models E series are recommended mainly for a stationary installation, but at the same time, due to their practicality and convenience in circulation, they can successfully It is used as an emergency solution for draining flooded premises or temporary installations for pumping from wells and from tanks.
These are pumps are intended mainly for the household market and find their use in sealing small systems, in watering spraying gardens and gardens, in Fountain nutritions in the emptying of pools or drainage tanks, as well as in draining flooded rooms, such as cellars and garages.
dge h3>
Div >
frequency 50 Hz
poles 2
Vertical pressure pipe pipe 1½ " - pipe 2" Div
Horizontal pressure pipe 2 " - DN50 DIV>
free passage 50 mm
Max. Productivity 696 l/min DIV>
Max. pressure 15.7 m
Dre h3>
Div >
frequency 50 Hz
poles 2
Vertical pressure pipe pipe 1¼ " - pipe 2"
Horizontal pressure pipe GAS 2 " - DN50 DIV>
free passage 15 mm
Max. performance 756 l/min
Max. Ples 18.0 m
Dre h3>
Div >
frequency 50 Hz
poles 2
Vertical pressure pipe pipe 1¼ " - pipe 2"
Horizontal pressure pipe GAS 2 " - DN50 DIV>
free passage 15 mm
Max. performance 756 l/min
Max. Ples 18.0 m