Description < /span>
Vertical pump with a transmission shaft, With a two-prose spiral case with a transverse connector for wet or dry installation, with a radial wheel, single-type, one- or two-stage, is also possible heated execution. ATEX performance
Scope
for pumping chemically aggressive liquids, weakly pierced liquids or liquids with a slight content of solid particles, in the chemical and petrochemical industries.
Review of technical data
q (50hz)
2.0-980, 0 (m³/h)
h (50hz)
3.0-135, 0 (m)
type of bearing
Linging bearing and sliding undergrowth < /span>
separation of the case
transverse (radial)
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
Low voltage
the number of inputs of the working wheel
Single-flow < /span>
heated
Yes < /span>
max. Destation depth
9500.0 (mm)
work wheel material (according to the standard E
Jl 1040, 1.4408
type of coupling
directly < /span>
type of lubricant
consistent lubrication/lubricant of the pumped environment
max. Permissible fluid temperature
300.0 (° C) /span>
Pack of the pipe
Variant < /span>
maximal working pressure
Pn 16
installation of the unit
"Dry" installations, flooded.
shaft material (according to the standard EN)
C45SH+S, 1.4571 SH
characteristics on absorption
Nonamovy. /span>
Tear stove
Yes < /span>
type of case
Spiral Corps
type of working wheel
Radial, closed
type of accession
Fill < /span>
classification UNSPSC
4015150300 < /span>
body material (according to the standard EN)
1.4408, jl 1040
eclass
36410000, 36410100, 36410101 < /span>
installation position
Vertical < /span>
type of shaft seal
Salnic stuffing, end seal < /span>
the main areas of application
industry and technological processes
body material
Gray Cast iron, stainless steel < /span>
max. Working pressure on the pressure sides
16.0 (BAR)
max. Driving power
290.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
3500.0 (1/min)
| q (50hz) | 2.0-980, 0 (m³/h) |
| h (50hz) | 3.0-135, 0 (m) |
| type of bearing | Linging bearing and sliding undergrowth < /span> |
| separation of the case | transverse (radial) |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | Low voltage |
| the number of inputs of the working wheel | Single-flow < /span> |
| heated | Yes < /span> |
| max. Destation depth | 9500.0 (mm) |
| work wheel material (according to the standard E | Jl 1040, 1.4408 |
| type of coupling | directly < /span> |
| type of lubricant | consistent lubrication/lubricant of the pumped environment |
| max. Permissible fluid temperature | 300.0 (° C) /span> |
| Pack of the pipe | Variant < /span> |
| maximal working pressure | Pn 16 |
| installation of the unit | "Dry" installations, flooded. |
| shaft material (according to the standard EN) | C45SH+S, 1.4571 SH |
| characteristics on absorption | Nonamovy. /span> |
| Tear stove | Yes < /span> |
| type of case | Spiral Corps |
| type of working wheel | Radial, closed |
| type of accession | Fill < /span> |
| classification UNSPSC | 4015150300 < /span> |
| body material (according to the standard EN) | 1.4408, jl 1040 |
| eclass | 36410000, 36410100, 36410101 < /span> |
| installation position | Vertical < /span> |
| type of shaft seal | Salnic stuffing, end seal < /span> |
| the main areas of application | industry and technological processes |
| body material | Gray Cast iron, stainless steel < /span> |
| max. Working pressure on the pressure sides | 16.0 (BAR) |
| max. Driving power | 290.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 3500.0 (1/min) |
