Description < /span>
Vertical semi-loading pump with a transmission shaft Without a guide bearing, wet or dry installation. A half -open work wheel, the shaft is installed in ball bearings in the upper part of the unit. A pressure pipe with a pipe above the foundation plate (CINCP) or without a pressure pipe (CINCN). ATEX performance
Scope
in the chemical or petrochemical industry, in the chemical or petrochemical industry mining of raw materials and sewage facilities.
Review of technical data
q (50hz)
0.7-320, 0 (m³/h)
h (50hz)
3.5-95, 0 (m)
type of bearing
Encouraging
separation of the case
transverse (radial)
drive
Elector < /span>
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
Low voltage
electric connector
230/400 V, 3 ~
explosion protection
ATEX (94/9/ EC)
1. Type of working wheel
Single-flow < /span>
max. Destation depth
1585.0 (mm)
work wheel material (according to the standard E
CA6NM, CF8M, JL 1040
type of coupling
directly < /span>
type of lubricant
consistent lubricant/oil lubricant < /span>
max. Permissible fluid temperature
100.0 (° C) /span>
installation of the unit
"Dry" installations, flooded.
shaft material (according to the standard EN)
Aisi-316l, F- 114
characteristics on absorption
Nonamovy. /span>
Tear stove
Yes < /span>
type of case
Spiral Corps
type of working wheel
Open < /span>
body material (according to the standard EN)
CA6NM, CF8M, JL1040 < /span>
installation position
Vertical < /span>
type of shaft seal
Highlights of the shaft
the main areas of application
industry and technological processes, water supply
max. Working pressure on the pressure sides
10.0 (Bar)
max. Driving power
184.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
3500.0 (1/min)
& nbsp;
| q (50hz) | 0.7-320, 0 (m³/h) |
| h (50hz) | 3.5-95, 0 (m) |
| type of bearing | Encouraging |
| separation of the case | transverse (radial) |
| drive | Elector < /span> |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | Low voltage |
| electric connector | 230/400 V, 3 ~ |
| explosion protection | ATEX (94/9/ EC) |
| 1. Type of working wheel | Single-flow < /span> |
| max. Destation depth | 1585.0 (mm) |
| work wheel material (according to the standard E | CA6NM, CF8M, JL 1040 |
| type of coupling | directly < /span> |
| type of lubricant | consistent lubricant/oil lubricant < /span> |
| max. Permissible fluid temperature | 100.0 (° C) /span> |
| installation of the unit | "Dry" installations, flooded. |
| shaft material (according to the standard EN) | Aisi-316l, F- 114 |
| characteristics on absorption | Nonamovy. /span> |
| Tear stove | Yes < /span> |
| type of case | Spiral Corps |
| type of working wheel | Open < /span> |
| body material (according to the standard EN) | CA6NM, CF8M, JL1040 < /span> |
| installation position | Vertical < /span> |
| type of shaft seal | Highlights of the shaft |
| the main areas of application | industry and technological processes, water supply |
| max. Working pressure on the pressure sides | 10.0 (Bar) |
| max. Driving power | 184.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 3500.0 (1/min) |
