Oil pumps of the NPV type

Oil pumps of the NPV type

"> NPV pumps - centrifugal, vertical, one- or multi -stage (depending on the required pressure), with a pre -disposable wheel, with an end seal of the end type, with a drive from the electric motor. The main assembly units of the pumps are a glass and a minute with an engine lamp. Rotor supports: upper-supporting roller bearings, lower-sliding bearing operating on a pumped environment.

Designed for supplying oil or oil products to main pumps to ensure their inconsistency operation, are also used for Equipping the bases of mixing of oil, gluten-linked overpasses.

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

No. Pump brand Feed, m 3 /h Ples, m Rotation frequency, rpm (synchr.) Engine power, kW
1 NPV 150-60 150 60 3000 90
2 NPV 150-60 150 90 3000 90
3 NPV 300-60s 300 40 3000 90
4 NPV 300-60 300 60 3000 90
5 NPV 300-60 300 150 3000 200
6 NPV 600-60 600 60 1500 200
7 NPV 1250-30 1250 30 1000 160
8 NPV 1250-60 1250 60 1000 315
9 NPV 1250-110-m 1250 110 1000 630
10 NPV 2500-40-M 2500 40 1000 400
11 NPV 2500-80-m 2500 80 1000 800
12 NPV 2500-120-M 2400 103 1000 800
13 NPV 2500-120-M 2500 120 1000 1250
14 NPV 2500-120A-M 2500 110 1000 1000
15 NPV 3600-45-M 3600 45 1000 630
16 NPV 3600-90-M 3600 90 1000 1250
17 NPV 3600-90-M 4500 80 1000 1600
18 NPV 3600-120-M 3600 120 1000 1600
19 NPV 3600-135-M 3600 135 1000 2000
20 NPV 3600-135A-M 3600 120 1000 1600
21 NPV 5000-60s 5000 60 1000 1250
22 NPV 5000-120s 5000 120 1000 2000
23 NPV 5000-120-M1 5000 120 1000 2000
24 NPV 5000-120-m2 5000 120 1000 2000