Oil pump pump

Oil pump pump

Pumps and pumping pumps pumps At their base are designed for pumping oil, liquefied hydrocarbon gases and oil products with a density of not more than 1800 kg/m 3 .

The temperature of fluid pumping from minus 80 ° С up plus 420 ° С.

viscosity from 0.7x10 < SUP> -4 M 2 /C to 8.5x10 -4 M 2 /s.

They are used in technological installations for pumping oil, petroleum products, liquefied hydrocarbon gases, organic solvents and other liquids similar to the viscosity and corrosion effect on the pump parts, not more than 1800 kg/m 3 . The temperature of the pumped liquid is from -80 ° C to +400 ° C. The viscosity of 0.5x10 -4 m 2 /s to 8.5x10 -4 m 2 /s. The choice of the material of the flow part of the pump depends on the temperature and properties of the pumped fluid. Pumps are produced in climatic performance U, T, UHL of the placement category 1, 2, 3 and 4 in accordance with GOST 15150. Designed to work in explosive industries belonging to the category of explosiveness IIA, IIB and groups T1, T2, T3, T4 according to GOST30852.1111 .

Pumps are equipped with oilcopod or end seals (single, double, double type “tandem”), SKF bearings or at the request of the customer (FAG, NACHI, NTN). Pumping units are equipped with explosion -proof electric motors and delivered on welded frames or foundation stoves.

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

Designation Number of revolutions of the pump, rpm
2950 1475
Feed, Pressure, Feed, Pressure,
M 3 /h M M 3 /h M
Oil pumps of the tissue type (console)
Tk16/80g 16 80 8 20
Tk16/125g 16 125 8 30
Tissue32/80g 32 80 16 20
Tissue32/125g 32 125 16 30
Tissue63/80g 63 80 32 20
Tissue63/125g 63 125 32 30
Tissue63/200g, in 63 200 32 70
32 200 16 70
Tk120/80g 120 80 60 20
Tk120/125g 120 125 60 30
TKA210/80g 210 80 120 20
TKA210/125G 210 125 120 30
TKA210/125B 210 125 120 30
Tissue315/125g - - 315 125
Tissue600/80g - - 600 80