Pumps and pumping pumps pumps At their base are designed for pumping oil, liquefied hydrocarbon gases and oil products with a density of not more than 1800 kg/m 3 .
The temperature of fluid pumping from minus 80 ° С up plus 420 ° С.
viscosity from 0.7x10 < SUP> -4 M 2 /C to 8.5x10 -4 M 2 /s.
Pumps are produced in climatic design , Ukhl, t, placement categories 1, 2, 3 and 4 GOST15150.
are used in technological installations for pumping neutral, aggressive, easily igniting liquids and liquefied gases with a density of not more than 1000 kg/m 3 , temperature from -60 ° C up to +250 ° C, viscosity of not more than 30x10 -6 m 2 /s. Designed to work in explosive industries, in which the formation of explosive mixtures of gases and air vapors belonging to the category of explosiveness IIA, IIB and groups T1, T2, T3, T4 according to GOST30852.11.
The rotation from the drive is transmitted using a magnetic coupling through a sealed shell (titanium screen). This design provides complete tightness of the pump. The magnetic field is created by two magnets, which are located on the inner and outer half -wrappers. The pump rotor is equipped with sliding bearings made of graphite, which is resistant to chemically aggressive environments, in a metallic steel frame resistant to wear. Pumps of the pumping type of tissue are equipped with explosion -proof electric motors, magnetic and self -cleaning filters, installed on a welded frame.
oil pumps such as tissue
Wednesday with a high content of solid particles.
(hermetic)
material of the running part of the pumps:
n -stal chromoniceltic 12x18n9tl.
35
tissue16/80
16
80
8
20
42
tissue16/125
16
125
8
30
32
tissue32/80
32
80
16
20
47
tissue32/125
32
125
16
30
46
tissue63/125
63
125
32
30
30
tissue210/80
210
80
100
20
34
tkam32/80 special.
32
80
16
20
40
tissue63/80 special.
63
80
32
20
