Hid pumps GR200/60 (6FSh-7a*) and electric pump units based on them are designed to pump high abbrous hydroxies with pH 6 ... 12, density up to 1300 kg/m3, with a temperature of 278 to 343 K (from 5 to 70 ° C ), volumetric concentration of solid inclusions up to 30%, with the size of solid particles up to 6 mm, micro -hardness up to 11000 MPa.
In the unit of the electric pump, the transmission of the torque from the electric motor to the soil pump is carried out through the sleeve-jacket coupling.
The scope of the sludge pumps GR200/60 (6FSh-7A*) Cement plants, metallurgical enterprises.
The structural scheme of the designation of the electrician unit during order, correspondence and technical documentation:
"Unit GR 200/60 - 1.3", where
GR - type of pump;
200 - nominal feed in m3/h;
60 - nominal pressure in m;
1.3 - the maximum density of a hydros mixture pumped by the pump unit, reduced by 1000 times, kg/m3.
*in the brackets indicate the designation of the pump operating until 1973
|
Mark |
water supply to the oil seal, m3/h |
nominal parameters |
The diameter of the r/wheel, |
Gabarit |
mass, |
engine |
Complexation |
||||
|
File, |
pressure, |
density/ |
Mark |
powerful. |
frequency, |
||||||
|
GR200/60 (6FSH7A) Pump, coupling |
1.4 |
200 |
60 |
1.3 t/m3 5 ... 70 s |
407 |
1438x780x800 |
622 |
- |
- |
- |
Pump, clutch |
| Pumps | |
| Power/speed | -/- |
| Flow, cubic meters/hour | 200 |
| pressure | 60 |
