Submissive vibration pumps “UnipUMP” of the “Bavavlennets” series with the upper and lower water fence - designed to supply clean fresh water from wells, wells with a diameter of at least 100 mm, various reservoirs, open water bodies; Connected to an alternating current of 220 V.
Scope - watering of personal plots, pumping up small and medium tanks, organization of individual water supply systems. The pumped liquid should not contain solid and fibrous inclusions, the total number of mechanical impurities - not more than 100 g/m³.
Vibration pumps “UnipUMP Bavoden”, made with the upper and lower fence of water, allow you to pump out water to a minimum level. Pumps can work from benzoelectric and solar generators with a capacity of at least 0.5 kW.
To increase the supply and pressure, a parallel or consistent connection of several pumps is possible.
Technical characteristics
- AC voltage, B - 220
- Frequency, Hz - 50
- Nominal power, Tue - 245
- Current, but, no more - 3.7
- Maximum pressure, m - 75
- Maximum performance, l/hour - 1600
-
Volumetric supply of water from a depth, l/h, no less than
20 m - 950
30 m - 720
40 m - 432 - Internal diameter of the well, mm, at least - 100
- Water temperature, ° C, no more than - +35
- Cable length, m - 6, 10, 15, 25 or 40
- Pump protection class - IPX8
- Mass without wire, kg, no more than - 3.5
- Model "Bavoden M" - with the upper fence of water
- Model "Basodnets" - with the lower water fence
- Assembly size, mm - 18
Note: Nominal volumetric supply of water for the pumps “Bavavlennets”, “Bavavenets M”, “Bavovnets 3” - 432 l/h, the remaining indicators of volumetric water supply - reference.
Submissive vibration pumps “Unipump” of the Bedavlits 2 series are designed to raise water from wells and wells with an inner diameter of more than 100 mm, as well as for pumping fresh water from any waterpolks with a water temperature of not more than +35 ° P.
The scope is for autonomous water supply to individual buildings, cottages, country houses, for organizing watering gardens, garden plots, small farms. The pumped liquid should not contain solid and fibrous inclusions, the total number of mechanical impurities - not more than 100 g/m 3 .
Bavavlenen 2 is an innovative model that has no analogues. The water intake occurs simultaneously from the upper and lower parts of the pump body. The design of the pump allows you to get the highest pressure-production characteristics among vibrational pumps.
Technical characteristics
- AC voltage, B - 220
- Frequency, Hz - 50
- Dimensional dimensions: height, mm no more, diameter, mm, no more than - 545x99
- Mass without wire, kg, no more - 7
- The maximum immersion depth from the water mirror, m, no more than 3
An increase in the depth of immersion is allowed, for example, with a low -deck well up to 6 m.
| Connection | |||
|---|---|---|---|
| Parameters | Joint connection | Turning on the upper pump | Inclusion of the lower pump |
| Nominal power without taking into account losses in the supply wire when you pressure 0.4 MPa (4 BAR), W, no more than | 490 | 245 | 245 |
| Current, but no more | 7.4 | 3.7 | 3.7 |
|
Volumetric supply of water from depth, l/h, no less: 40 m 30 m 20 m 0 m |
864 1440 1800 2000 |
432 720 900 1000 |
432 720 900 1000 |
