The three-plunger cementing SCH-32 pump is designed to pump liquids under high pressure. It is used in cementing units to pump liquid media (clay, cement, saline solutions) for flushing and supplying operations and cementing oil and gas wells during their drilling and overhaul. As well as in installations for acid treatment of wells.
Comparative characteristics of the SCH-32 and 9T pump
- Confirmed work resource-10 years or 6,000 motorcons (900-2500 motorizedists have a 900-sized pump. ).
- PPD pump with a gearbox-0.9 (PPD of the pump 9T-0.5 ).
- guarantees for the pump-2 years.
- Ease of use and ease of maintenance (full service time with the replacement of all interchangeable parts - 60 minutes).
- Reliable protection of the mechanical part of the pump from the entry of the pumped fluid through the density of the case due to the use of a sealed cover.
- Increased wear resistance of plunger (plunger work resource is 2 times higher than that of the piston of the pump 9t).
- The absence of a built -in reducer with a chevron gear due to a hinged planetary gearbox.
- The stability of technical characteristics for the entire time of operation (stability of characteristics for consumption and pressure regardless of the production of the pump).
| Sin-32 | Three -glue horizontal |
|---|---|
| The maximum useful hydraulic power (no less), kW | 130 |
| Plunger diameter, mm | 100, 125 |
| Maximum pressure*, MPa with a diameter of the plunger: | |
| 100 mm | 50 |
| 125 mm | 32 |
|
The greatest ideal feed*, l/s (m3/h) (at the speed of rotation of the pump shaft 320 rpm) With a plunger diameter: |
|
| 100 mm | 16.3 (59) |
| 125 mm | 25.5 (92) |
| Dimensional dimensions, mm | 1770x898x814 |
| The mass of the pump, kg | 1900 |
