Electric pump unit of the SHN type - centrifugal, horizontal, console, with a single end seal of the shaft. The pump case is a welded structure in which the suction and upholstered (input and output) pipe are made. The suction pipe is located along the rotation axis, the pressure pipe is directed vertically upward and is located along the rotation axis. The pump housing is installed on the flashlight, which is supportive for attaching the pump to the electric motor flange.
The electric pumping unit consists of a centrifugal pump and a flange electric motor with paws.
The work wheel is a centrifugal, unilateral entrance of an open type. Fluid supply to the axial work wheel.
The work wheel of the pump is fixed directly on the shaft and is driven by the electric motor.
The direction of rotation of the working wheel is clockwise if you look from the drive side.
In the lower part of the case there is a hole closed with a traffic jam for draining the remains of the liquid when the pump stops for a long time.
shn 2/2
Productivity: 2 cubic meters/hour
pressure: 2 meters
SHN 3/3
performance: 3 cubic meters/hour
pressure: 3 meters
SHN 5/3
performance: 5 cubic meters/hour
pressure: 3 meters
SHN 4/3
performance: 4 cubic meters/hour
pressure: 3 meters
SHN 3/4
performance: 3 cubic meters/hour
pressure: 4 meters
SHN 5/4
performance: 5 cubic meters/hour
pressure: 4 meters
SHN 4/4
performance: 4 cubic meters/hour
pressure: 4 meters
SHN 6/4
performance: 6 cubic meters/hour
pressure: 4 meters
