Purpose: PSV pumps and pumping units for their Based on the type of ACCV are designed for pumping condensate in steam-watering networks of thermal and energy blocks of thermal power plants, as well as pure water with a temperature of up to 140 0 C in the systems of heat and water supply.
Construction: condensate KSV pumps-centrifugal, vertical, single-depth. , one- or multi-stage, double-hustle with a high-level interior of a sectional type. The KSV pump 200-130-with the working wheel of the first stage of the bilateral entrance. The outer building is welded with pipes for welding to pipelines. Rotor supports are: lower - sliding bearing, built into work on a pumped environment; Upper - remote roller bearings with plastic or crankcase grease. Unloading the rotor from axial forces is hydraulic using hydraulic or unloading drum. Shaft seals-mechanical with a saline stuffing (-c) interchangeable with mechanical end (-t).
Materials: < /p>
- Corps, covers and sections-leaflets from carbon steels;
- Details of the Protopic part-pushing and redemption from chromium steels 20x13l and 30x13;
- Details of slotted seals-unprotected corrosion-resistant alloys;
- VAL-varietal rental of doped steel 40x.
Complement: < /p>
- Assembled with a bracket for mounting an engine and auxiliary pipelines within the pump;
- The drive electric motor;
- Continuator like MUVP or MUP;
- Parts of fastening the pump and engine;
- SEP.
