Horizontal one-stage spiral pump with an elongated coupling and a posterior sliding design. Smecked protective casing of the shaft and protective rings of the case.
Review of technical data
q (50 Hz)
82.0-468.0 (m³ / h)
h (50 Hz)
84.0-163.0 (m)
type of bearing
ball bearings < /span>
partition
radially split
drive frequency
50 Hz/60 Hz < /span>
type of drive
Elector, turbine, engine
drive voltage
Low voltage
the number of recordings of the working wheel
single < /span>
Workpoint material (EN standard)
1.4408
type of installation
Long communication
type of adhesion
direct /span>
type of lubricant
oil lubricant
maximum. The permissible fluid temperature < /span>
20 /span>
the position of the nozzle
The end of absorption
maximum working pressure
25 bar
draw-up design
yes /span>
the location of the pump unit
dry set
shaft material (standard EN)
1.4057, 1.4462
absorption characteristics
non-grouping
is suitable for drinking water
yes /span>
type of working wheel
radial, closed, multi-lobed impeller
type of connection
Flaint /span>
body material (standard EN)
js1025 < /span>
purpose eclass
36410101, 36410000, 36410100 < < /span>
type of shaft seal
Mechanical compaction, oilcoper stuffing < /span>
main applications
industry and technological engineering, construction services, water < /font>
body material
cast iron /span>
maximum pressure on the injection side
25.0 (bar)
maximum drive rating
250.0 (kW)
type of installation
Stationary < /span>
maximum rotation speed
2980.0 (1/ min)
| q (50 Hz) | 82.0-468.0 (m³ / h) |
| h (50 Hz) | 84.0-163.0 (m) |
| type of bearing | ball bearings < /span> |
| partition | radially split |
| drive frequency | 50 Hz/60 Hz < /span> |
| type of drive | Elector, turbine, engine |
| drive voltage | Low voltage |
| the number of recordings of the working wheel | single < /span> |
| Workpoint material (EN standard) | 1.4408 |
| type of installation | Long communication |
| type of adhesion | direct /span> |
| type of lubricant | oil lubricant |
| maximum. The permissible fluid temperature < /span> | 20 /span> |
| the position of the nozzle | The end of absorption |
| maximum working pressure | 25 bar |
| draw-up design | yes /span> |
| the location of the pump unit | dry set |
| shaft material (standard EN) | 1.4057, 1.4462 |
| absorption characteristics | non-grouping |
| is suitable for drinking water | yes /span> |
| type of working wheel | radial, closed, multi-lobed impeller |
| type of connection | Flaint /span> |
| body material (standard EN) | js1025 < /span> |
| purpose eclass | 36410101, 36410000, 36410100 < < /span> |
| type of shaft seal | Mechanical compaction, oilcoper stuffing < /span> |
| main applications | industry and technological engineering, construction services, water < /font> |
| body material | cast iron /span> |
| maximum pressure on the injection side | 25.0 (bar) |
| maximum drive rating | 250.0 (kW) |
| type of installation | Stationary < /span> |
| maximum rotation speed | 2980.0 (1/ min) |
