Pump ACML-MD

Pump ACML-MD
The centrifugal monoblock "in the line" in the line »With a wet rotor of Azml-M
Technical characteristics
  • "> Submit: up to 78 m³ h.
  • "> Ples: up to 18 m.
  • "> Fully temperature: from -10 Mon up to + 120 ° C
  • "> Maximum working pressure: 1, 1, 0 MPa
  • "> Up to 3, up to 3, up to 3, up to 3 0 kW
Purpose < /span>
fluid pumping without solid inclusions and mineral oils, not viscous, chemical neutral, in terms of characteristics close to water (with maximum glycol content 30%).
Scope
circulation pumps with a "wet rotor »Designed for domestic open and closed air heating and air conditioning systems, for heat points, boiler houses, as well as heat and cold-supply systems of residential and commercial buildings. They are delivered in a single and dual design.
design of centrifugal monoblock pumps < /span>
Pumping units of the ACML-M present Called single -stage pumps with absorption and pressure pipes lying on the same line - a design of the Inline type. The electric motor is a two -pole asynchronous, with a “wet rotor”, a pumping pump from cast iron. The circulation pump operates at three speeds at a voltage of 3x400V. The operating speed of the pump is adjustable using a special switch in the terminal box, depending on the required characteristics of the system. The built -in check valve is installed in the body of dual hydraulics to prevent fluid overflow, when one of the pumps does not work.

& nbsp;

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

Model n & nbsp; DND, mm DNS, mm Pn, bar Nom, kW INU, and QoFDFDPT, M3/H Hopt, m Qmax, m3/hour Mass, kg Design
(rpm)
ACML-MD 60/250.40 3000 40 40 10 0.35 0.99 9.67 3.27 12.9 32 circulation pump with wet rotor
ACML-MD 120/250.40 3000 40 40 10 0.54 1.16 10.5 5.35 14 32 circulation pump with wet rotor
ACML-MD 60/280.50 3000 50 50 10 0.59 1.31 15.5 4,14 20.7 44.5 circulation pump with wet rotor
ACML-MD 120/280.50 3000 50 50 10 0.9 1.67 19,2 5.5 25.6 49 circulation pump with wet rotor
ACML-MD 150/280.50 3000 50 50 10 1.47 2.9 23,1 6.57 30.9 49 circulation pump with wet rotor
ACML-MD 180/280.50 3000 50 50 10 1.63 3 22.2 10.9 29.6 49 circulation pump with wet rotor
ACML-MD 60/340.65 3000 65 65 10 0.76 1.5 25.5 3.63 34.1 54.5 circulation pump with wet rotor
ACML-MD 120/340.65 3000 65 65 10 1.27 2.64 29.6 5.93 39.4 59 circulation pump with wet rotor
ACML-MD 150/340.65 3000 65 65 10 1.8 3.25 34.3 8.61 45.7 59 circulation pump with wet rotor
ACML-MD 180/340.65 3000 65 65 10 2.31 4 35 13.5 46.8 59 circulation pump with wet rotor
ACML-MD 120/360.80 3000 80 80 10 1.82 3.3 44.5 6,16 59.3 72 circulation pump with wet rotor
ACML-MD 150/360.80 3000 80 80 10 2.87 4,64 56.2 7.72 75 72 circulation pump with wet rotor
ACML-MD 180/360.80 3000 80 80 10 2.31 4 39.6 8.78 52.7 72 circulation pump with wet rotor