Pump ACML-M

Pump ACML-M
The Centrifugal Monoblic Unit "in the line »With a wet rotor of Azml-M
Technical characteristics
  • "> Submit: up to 78 m³ h.
  • "> pressure: up to 18 m.
  • "> fluid temperature: from -10 Mon up to + 120 ° C
  • "> Maximum working pressure: 1, 0 MPa
  • "> Up to 3, up to 3, up to 3, up to 3 0 kW
purpose < /span>
fluid pumping, without solid inclusions and mineral oils, not viscous, chemical neutral, in terms of characteristics close to water (with maximum glycol content 30%).
Scope
Circular pumps with a "wet rotor »Designed for domestic open and closed air heating and air conditioning systems, for heat points, boiler houses, as well as heat and cold-supply systems of residential and commercial buildings. They are delivered in a single and dual design.
The design of centrifugal monoblock pumps < /span>
Pumping units of the ACML-M present Called single -stage pumps with absorption and pressure pipes lying on the same line - a design of the Inline type. The electric motor is a two -pole asynchronous, with a “wet rotor”, a pumping pump from cast iron. The circulation pump operates at three speeds at a voltage of 3x400V. The operating speed of the pump is adjustable using a special switch in the terminal box, depending on the required characteristics of the system. The built -in check valve is installed in the body of dual hydraulics to prevent fluid overflow, when one of the pumps does not work.

& nbsp;

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

Model n & nbsp; DND, mm DNS, mm Pn, bar Nom, kW INU, and QoFDFDPT, M3/H Hopt, m Qmax, m3/hour Mass, kg Design
(rpm)
ACML-M 60/250.40 3000 40 40 10 0.35 0.99 9.97 3.8 13.3 17.5 circulation pump with wet rotor
ACML-M 120/250.40 3000 40 40 10 0.54 1.16 11.5 5.1 15.3 17.5 circulation pump with wet rotor
ACML-M 60/280.50 3000 50 50 10 0.59 1.31 19,4 4,23 25.9 24 circulation pump with wet rotor
ACML-M 120/280.50 3000 50 50 10 0.9 1.67 24.1 5.35 32.2 26 circulation pump with wet rotor
ACML-M 150/280.50 3000 50 50 10 1.47 2.9 25.9 7.46 34.6 26 circulation pump with wet rotor
ACML-M 180/280.50 3000 50 50 10 1.63 3 27.6 10.5 36.7 26 circulation pump with wet rotor
ACML-M 60/340.65 3000 65 65 10 0.76 1.5 27.7 3.95 37.1 30.5 circulation pump with wet rotor
ACML-M 120/340.65 3000 65 65 10 1.27 2.64 34.1 5.99 45.6 32.5 circulation pump with wet rotor
ACML-M 150/340.65 3000 65 65 10 1.8 3.25 39.4 8.32 52.4 32.5 circulation pump with wet rotor
ACML-M 180/340.65 3000 65 65 10 2.31 4 40 10.8 53.3 32.5 circulation pump with wet rotor
ACML-M 120/360.80 3000 80 80 10 1.82 3.3 48 7,13 64 40 circulation pump with wet rotor
ACML-M 150/360.80 3000 80 80 10 2.87 4,64 58.4 9.48 78 40 circulation pump with wet rotor
ACML-M 180/360.80 3000 80 80 10 2.31 4 41.2 10.6 55 40 circulation pump with wet rotor