Centrifugal horizontal single-oriented with unilateral and tangential fluid output pumps, such and e-M, designed for pumping water and other liquids, clean from mechanical impurities, the viscosity and chemical activity of which is close to the viscosity and activity of water with a temperature of not higher than 80 ° C.
The pump drive is a three-phase electric motor with a voltage of 380V and a frequency of 50Hz. By order of the client, pumps can be equipped with special engines.
During the version of the EM, the pump is mounted monoblockly on the valve of the electric motor. Salnic or end seal of the pump shaft is selected in accordance with the pumped liquid. In the presence of mechanical impurities, pure water is supplied to the chambers of the end seal.
| Type of pump | n = 2900 min -1 | ||
| feed < /span> | pressure < /span> | η < /span> | |
| l/s | m < /span> | % < /span> | |
| 25e12 < /span> | 25 < /span> | 12 < /span> | 79 < /span> |
| 25e12-m | 25 < /span> | 12 < /span> | 79 < /span> |
| 25e20 < /span> | 25 < /span> | 20 < /span> | 79 < /span> |
| 25e20-m | 25 < /span> | 20 < /span> | 79 < /span> |
| 25e20a < /span> | 22 < /span> | 15.5 | 77 < /span> |
| 25e20a-m | 22 < /span> | 15.5 | 77 < /span> |
| 25e32 < /span> | 25 < /span> | 32 < /span> | 77 < /span> |
| 25e32-m | 25 < /span> | 32 < /span> | 77 < /span> |
| 25e32a < /span> | 23 < /span> | 28 < /span> | 75 < /span> |
| 25e32a-M | 23 < /span> | 28 < /span> | 75 < /span> |
| 25E50 < /span> | 25 < /span> | 50 < /span> | 78 < /span> |
| 25E50 | 25 < /span> | 50 < /span> | 78 < /span> |
| 25E50A < /span> | 22 < /span> | 40 < /span> | 74 < /span> |
| 25E50A-M | 22 < /span> | 40 < /span> | 74 < /span> |
| 25E80 < /span> | 25 < /span> | 80 < /span> | 72 < /span> |
| 25E80 | 25 < /span> | 80 < /span> | 72 < /span> |
| 25E80A < /span> | 22.5 | 73 < /span> | 74 < /span> |
| 25E80A-M | 22.5 | 73 < /span> | 74 < /span> |
| 25E80V < /span> | 20.5 | 67 < /span> | 70 < /span> |
| 25E80V-M | 20.5 | 67 < /span> | 70 < /span> |
