5an electric motors are designed for a long operating mode (S1 GJ UJCN 183) in closed rooms from a variable current network frequency of 50 or 60 Hz.
operating conditions of the electric motor 5an:
5an series electric motors are designed for use in areas with moderate (UZ) and tropical climate (TK), according to GOST 15150, and a height not exceeding 1000 m.
Depending on the type of climatic execution, which is indicated in the table of the passport data of the device, the required relative humidity and air temperature is different:
- For electric motors of the UZ: temperature in the range -40 ...+40 ° C;
- For TK electric motors: temperatures in the range -10 ...+50 ° C and relative humidity up to 70% at a temperature of 27 ° C.
The impact of external mechanical factors belonging to the M1 group will not complicate the operation of the electric motor, since the resistance to this type of exposure is provided for GOST17516.1.
such factors include:
- - sinusoidal vibration in the range of 0.5 ... 35 Hz;
- - acceleration amplitude up to 5 m/s.kv. (0.5g);
- - Single and multiple strokes are absent.
For the load on the working end of the shaft, an elastic coupling or a cuneiform gear can be used. If the electric motor has two ends of the shaft, the load on the second should be carried out only with the help of an elastic coupling. When operating the engine of this model, the load, which falls on both ends of the shaft, should not exceed the nominal, indicated for this particular electric motor.
|
Type |
Power |
Voltage |
Synchronous |
KPD |
KOEF. |
|
5an280a-2 |
160 |
380/660 |
3000 |
94 |
0.9 |
|
5an280b-2 |
200 |
380/660 |
3000 |
94 |
0.89 |
|
5an280a-4 |
132 |
380/660 |
1500 |
93 |
0.89 |
|
5an280b-4 |
160 |
380/660 |
1500 |
94 |
0.9 |
|
5an280a-6 |
90 |
220/380 |
1000 |
92.5 |
0.89 |
|
5an280b-6 |
110 |
220/380 |
1000 |
92.8 |
0.89 |
|
5an280a-8 |
75 |
220/380 |
750 |
92 |
0.85 |
|
5an280b-8 |
90 |
220/380 |
750 |
92.5 |
0.83 |
|
5an280a-10 |
45 |
220/380 |
600 |
90.5 |
0.81 |
|
5an280b-10 |
55 |
220/380 |
600 |
91 |
0.81 |
|
5AH315A-2 |
250 |
380/660 |
3000 |
94 |
0.91 |
|
5AH315S-2K |
160 |
0.89 |
|||
|
5AH315B-2 |
200 |
1500 |
0.91 |
||
|
5AH315A-4 |
160 |
0.89 |
|||
|
5AH315S-4K |
250 |
94.3 |
0.9 |
||
|
5AH315B-4 |
132 |
1000 |
93.5 |
0.89 |
|
|
5AH315A-6 |
110 |
220/380 |
|||
|
5AH315S-6K |
160 |
380/660 |
94 |
||
|
5AH315B-6 |
110 |
220/380 |
750 |
93 |
0.86 |
|
5AH315A-8 |
90 |
220/380 |
93 |
0.84 |
|
|
5AH315B-8 |
132 |
380/660 |
93.2 |
0.86 |
|
|
5AH315A-10 |
75 |
220/380 |
600 |
91.5 |
0.84 |
|
5AH315B-10 |
90 |
92 |
0.84 |
||
|
5AH315A-12 |
55 |
500 |
91 |
0.78 |
|
|
5AH315B-12 |
75 |
91 |
0.78 |
||
|
5an355a-2 |
315 |
380/660 |
3000 |
94 |
0.92 |
|
5an355b-2 |
400 |
380/660 |
3000 |
95 |
0.92 |
|
5an355a-4 |
315 |
380/660 |
1500 |
94.5 |
0.91 |
|
5an355b-4 |
400 |
380/660 |
1500 |
94.5 |
0.91 |
|
5an355a-6 |
200 |
380/660 |
1000 |
94 |
0.9 |
|
5an355b-6 |
250 |
380/660 |
1000 |
94.5 |
0.9 |
|
5an355a-8 |
160 |
380/660 |
750 |
93.5 |
0.86 |
|
5an355b-8 |
200 |
380/660 |
750 |
94 |
0.86 |
|
5an355a-10 |
110 |
220/380 |
600 |
92.5 |
0.83 |
|
5an355b-10 |
132 |
380/660 |
600 |
92.5 |
0.83 |
|
5an355a-12 |
90 |
220/380 |
500 |
92 |
0.77 |
|
5an355b-12 |
110 |
220/380 |
500 |
92.5 |
0.77 |
