Ugles 12U10 -the main purpose of this coal pump is the hydraulic transmission of chemically neutral hydroxide of the peach and other bulk materials with a pH of 6 to 8, near Which the ratio between the solid and liquid fraction is 1: 3. In the presence of proper backwater, a large concentration of solid particles in the pulp is also possible. When working Ugles 12U10 The temperature of the suspension should not exceed 50 ° C.
Ugles 12U10 , is a severe version of the centrifugal specialized console type pump and is able to transport the water overjud mixture with the maximum size of hard parts up to 90mm. Due to the fact that coal and breed particles are abrasive materials and wear out the working organs of the ugles, to maximize the wear of parts in the Uglax 12U10 provides for a number of special design features-the surfaces of the working bodies are made of wear-resistant special metals. So, the flowing part of the Uglesxia 12U10 are made of the following alloys:
- "> ">;">
- spiral body -steel ST40HL;
- Wheel wheel -alloy ICH14G2N;
- armidist -alloy ICh14g2n;
- absorbing Pipe - alloy ST40XL;
|
12u10 |
|
|
Feed, m3/h |
900 |
|
Ples, m |
90 |
|
The permissible vacuummeteric absorption height, m. |
5.5 |
|
Efficiency, no less % |
68 |
|
The recommended power of the electric motor is no more, kW |
315 |
|
Rotation speed, rpm. |
1500 |
|
Current frequency, Hz |
50 |
|
Network voltage, in |
6000 |
|
Diameter of the suction pipe, mm |
300 |
|
The diameter of the superintendent pipe, mm |
200 |
|
The overall dimensions of the pump, mm |
|
|
Length |
1882 |
|
Width |
994 |
|
Height |
975 |
|
The mass of the pump is no more, kg. |
2100 |
