Designed for pumping milk and similar to viscosity and chemical activity products up to +95 ° C and density up to 1250 kg/m 3 .
The pumped product should not contain abrasive particles. : RGB (83, 83, 83); font-Family: Opensans; Font-Size: 13px; " />
The shaft seal: single end (5), double end with the supply of bolt fluid in Sexation from the highway (55) and a double end with a tank for autonomous bolt fluid (55a). Pressure (excessive) at the entrance to the pump not more than 6 kgf/cm 2 (for pumps 25/32-not more than 2.0 kgs/cm 2 ).
The flow part is made of steel 12x18n10t.
conditional designation ONS1M1M -12.5/20-5 (55a) -35 (50) -u5-1 and ONCV (for evaporates), where:
O -industry dairy industry;
NC ... m - the pumping pump, modernized by the enterprise of OJSC" ENA "; SPAN>
1 - execution with absolute pressure at the pump up to 6 kgf/cm < /span> 2 ;
in - execution that ensures tightness at the input in static state up to 95% discharge;
12.5 - feed, m 3 /h;
20 - pressure, m;
5 - single end seal;
55 - Double end sealing with outbuilding from the highway;
55a - double end seal and tank for autonomous bolt fluid;
35 (50) - conditional diameter of the pipes;
1 - the conditional designation of the workplace of stainless steel; Without index “1”-a working wheel of plastic;
U5 -climatic execution and category of operation according to GOST 15150-69. < /span>
Minogic series of electric pumps on the ONC
| No. n | Mark Electro pump | Submitting Nominal, Q (Min, Max), M. Kub./h | Posh Nominal, N (Max, Min), M | ∆H, m, additional | Rotation frequency, rpm | Engine power, NED., KW | The mass of the el. | overall dimensions, lhbhh, mm | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 1. | ONC1M-6.3/20-5-35- (1) | 6.3 (2-8) | 20 (24-21) | 4 | 2900 | 1.5 | 28 | 435x240x355 | The overall dimensions are given with nipples |
| 2. | ONC1M-12.5/20-5-35 (50)-(1) | 12.5 (4-16) | 20 (25-17) | 4 | 2900 | 2.2 | 28 | 435x240x360 | |
| 3. | ONC1M-12.5/20-55 (55A) -35 (50)-(1) | 12.5 (4-16) | 20 (25-17) | 4 | 2900 | 2.2 | 30 | 490x270x360 | |
| 4. | ONC1M-25/32-5-50- (1) | 25 (8-32) | 32 (37-28) | 4 | 2900 | 5.5 | 50 | 520x300x410 | |
| 5. | ONC1M-25/32-55 (55A) -50- (1) | 25 (8-32) | 32 (37-28) | 4.0 | 2900 | 5.5 | 56 | 550x330x410 | |
| 6. | ONCV-25/32-55 (55A) -50- (1) | 25 (8-32) | 32 (37-28) | 4 | 2900 | 5.5 | 60 | 550x330x410 |
| Pump brand | The maximum dimensions of non -abrasive inclusions, mm |
Pack, m 3 /h | Ples, m |
Rotation frequency, rpm | El. engine, kW |
|---|---|---|---|---|---|
| ONCV 6.3/10k5-1.1/4 | 45 | 4 - 10 | 12 - 8 |
|
