Jurop PVT vacuum pump (PVT 200, PVT200) of Italian production, are 3 -x blackeful blowerproofs, gas pumping for vacuum gas pumping systems that do not contain polluting substances in the form of oil or water. PVT 200 vacuum pumps are structurally made with a swelling of sliding parts, and the absence of oil lubricant inside the compression chambers. PVT series pumps have a very effective cooling system with air with air. The PVT 200 pump blades provide high volumetric coefficient of useful action, which provides a high value of the achieved vacuum up to 92%..
The useability of the PVT200 pump - Ilosos from 8 to 15 cubic meters
A three -lobed centrifugal voluminous PVT pump with a braid of a gear ratio with synchronized phases 18
Lack of oil emissions into the atmosphere after paying
Work with reduced wear, reduced operational costs
Direction of the rotation of the pump PVT 200 clockwise or counterclockwise, in accordance with the order of theday
Dynamically balanced rotors to reduce vibrations (a) ✔
Bearings (c) and gears (c) with lubrication spraying, in the front and rear gearbox.
Internal combined seals of the vacuum pump PVT200: Y-seals and labyrinth seals (D) with Teflon/cast-iron rings and release into the atmosphere after utrief
Sealing and gaskets for high temperatures of the pump PVTul costs
The lateral cooling system with injecting of air and a sash valve at the PVT (E) pump ✔
This valve opens only in the vacuum functioning mode of the 18
Injection noisyman (compulsory auxiliary equipment) and at the output of the vacuum pump PVT 200 shop
Thermostat from overheating on the outlet of the vacuum pump PVT200 (F) ✔
Removable points of fastening of the lifting slings of the vacuum pump PVT 200 (G) (h) ✔
