KMN pumps 80,100,125

KMN pumps 80,100,125

The industries:

  • Chemical and petrochemical industry,
  • Oil processing industry,
  • Energy,
  • fuel storage.

Passed liquids:

  • Light oil products (gasoline, diesel fuel, kerosene, etc.),
  • Technical alcohols,
  • Passing of organic synthesis, in particular pyrolysis resin,
  • containing solid inclusions in an amount of not more than 0.01% by weight, with particles of not more than 0.2 mm and kinematic viscosity of liquids - not more than 20 S -SCT. Density 0.71 ÷ 1.0 g/cm 3 , temperature from-50 O C to +45 O p.

Type of structure:

  • The system of hydraulic unloading of the axial force reduces the axial load on the electric motor bearings, significantly increasing the pump resource.
  • The running part of the KMN pumps is made of corrosion -resistant aluminum alloy,
  • It is equipped with an explosion -proof electric motor,
  • permissible cavitation supply, no more than - 4.5 m.,
  • Type of climatic performance U2,
  • Athlet seal - single with additional cuffs,
  • Numeria of the pump is a three -phase alternating current, with a voltage of 380 centuries.

Technical characteristics:

& nbsp;

* - depending on the pumped liquid

The values ​​of the feed and pressure depending on the pumped fluid :

Pump brand Range
GOODS,
m3/h*		 Ples in
worker
Range,
m*		 Power
engine,
kW. 		Dimensions
Without containers,
mm 		Mass
Without containers,
kg
KMN 80-65-165 11-58 26-33 7.5 740x350x500 105
KMN 80-65-165 50-110 22-30 11 700x370x500 125
KMN 100-80-160 50-110 22-30 11 700x370x500 125
KMN 100-80-160 54-130 30-42 15 806x370x500 180
KMN 125-100-170 77-205 22-28 18.5 828x400x496 212
KMN 125-100-160 120-208 30-35 22 880x400x520 231

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

*Nominal feed (m3/h)/pressure (m.) KMN 80-65-165 (7.5 kW) KMN 80-65-165 (11 kW) KMN 100-80-160 (11kW) KMN 100-80-160 (15kW) KMN 125-100-170 (18.5 kW) KMN 125-100-160 (22kW)
Nominal feed when pumping water in different units of measurement:
- m3/h 30 50 50 100 130 160
- l/s 8.3 14 14 28 36 45
- m3/s 0.008 0.014 0.014 0.028 0.036 0.045
Nominal feed m3/h, when pumping:
- diesel fuel, density 850 kg/m3 36 60 60 120 156 192
- gasoline, density 760 kg/m3 39 65 65 130 169 208
Nominal pressure, m 30 ± 10% 30 ± 10% 30 ± 10% 32 ± 10% 24 ± 10% 30 ± 10%
Working range of feeds, m3/h (by water) 9 ÷ 45 50 ÷ 85 50 ÷ 85 54 ÷ 100 77 ÷ 158 120 ÷ 160
Working range of feeds, m3/h (according to diesel fuel, density 850 kg/m3) 11 ÷ 54 60 ÷ 102 60 ÷ 102 65 ÷ 120 92 ÷ 190 144 ÷ 192
Working range of feeds, m3/h (according to gasoline, density & nbsp; 760 kg/m3) 12 ÷ 58 65 ÷ 110 65 ÷ 110 70 ÷ 130 100 ÷ 205 156 ÷ 208
The pressure in the working range, m 26 ÷ 33 30 ÷ 22 30 ÷ 22 42 ÷ 30 28 ÷ 22 35 ÷ 30