Units are designed to pump chemically active liquids in torn outlets and installations with a temperature of up to 413 K (140 ° С), density up to 1800 kg/m 3 , kinematic viscosity up to 0.1 × 10 -4 m/s 2 , clean or containing solid inclusions in an amount of up to 10 % in volume, with a size of up to 0.5 mm.
Units are not designed in explosive and fire hazardous production. = "Box-Sizing: Inherit; Font-Family: Arial, Helvetica, Sans-Serif; Font-Size: 12pt;"> Polls drive is carried out from the electric motor through the elastic thinning-finger coupling. The pump and electric motor are installed on a common foundation frame. The working wheels of the pumps are made with rigidly fixed blades. The angle of installation of the blades is determined when placing an order based on the required parameters. - Salnic double or end. It is possible to replace the stuffing without emptying the device (except for the OKG6-25, -30).
|
units such as Ohg |
electric motors |
||||||||||||||||||||||||||||||||||||
|
Type |
feed, m³/h |
pressure, m |
Rotation frequency, rpm |
Mark |
Power, kW |
voltage, in |
|||||||||||||||||||||||||||||||
| OG6-25-K, E, I-SD-U3 | 560 | 3.6 | 1470 | 4AM160 S- 4u3 | 15 | 220/380 | |||||||||||||||||||||||||||||||
| OG6-30-K, E, I-SD-U3 | 1180 | 4 | 4AM180M-4U3 | 30 | |||||||||||||||||||||||||||||||||
| OG6-42-K, E, I-SD-U3 | 2120 | 3.6 | 980 | 4AM250M6-U3 | 55 | ||||||||||||||||||||||||||||||||
| Ohg6-55m-K, E, I-SD-U3 | 3550 | 3.6 | 735 | 4AM355 S -8u3 | 132 |
380/660
|
Air355 S -8u3 |
OG6-70-K, E, I-SD-U3
|
6000 |
3.6 |
590 |
AO3-400 s- 10u2 |
132 |
380/660
|
OG6-87-K, E, I-SD-U3
|
9500 |
3.6 |
490 |
A4-450U-12
|
315 |
6000 |
OG8-55-I-SD3
|
3550
|
7.5 |
735 |
AO3-400M-8U2
|
250 |
380/660
|
OG8-70, E, I-SD-U3
|
6000 |
7.5 |
590 |
A4-400U-10U3 |
250 |
6000 |
A4-450X-10U3 |
315 |
|
