DN pumps-centrifugal, horizontal, single-stage double-sided entrance and two-wire spiral dispensing. The input and pressure pipes are located in the lower part of the case and are directed in opposite directions, which provides convenient access to the rotor without disconnecting the pipes from pipelines.
Rotor supports are roller bearing with consistent lubricants. End seals - mechanical end, made in accordance with the requirements of the API 682 standard
The pump design provides for the possibility of replacing end seals with oilcopods.
The pump and the engine are installed on a common foundation plate. The transmission of the torque from the engine to the pump is carried out using a coupling elastic plate or elastic bushing-paltsevo.
designed to work as retaining or small main pumps that pump oil and oil products, as well as as pumps for intra -park pumping, railway bulk reeds and sea terminals.
| No. | Pump brand | Feed, m3/h | Ples, m | Frequency rejection |
Power |
|---|---|---|---|---|---|
| 1 | DN 1250-65 | 1250 | 65 | 1500 | 1000 |
| 2 | DN 600-80 | 600 | 80 | 1500 | 800 |
