Six-seater installation with a vertical design of the running part, produced in cast-iron and brass . From cast iron - designed for pumping chocolate masses; From brass - designed to pump aggressive products in confectionery industry. The viscosity of the pumped products should not exceed 505 cm2/s, density up to 1.45 t/m3, in the temperature range from 200C to 900C. Pumping installations are made in climatic design according to GOST 15150-69: - for the domestic market and to countries with a temperate climate - UHL4, - for supplying for export to countries with a tropical climate - TS or TV, if other execution is not specified in the order -order. Advantages:
- Simplicity in operation and maintenance;
- The versatility of the control and installation and connecting sizes for various performance;
- The possibility of manufacturing with a heating shirt;
- The ability to manufacture a pump on rolling bearings;
- The low speed of the working bodies significantly increases the service life of the unit.
intended for pumping sour-milk products, cottage cheese and cottage cheese mixtures , cream with a high content of fat, condensed milk, frozen mixtures. The pumps are easy to maintain, easily washed and disassemble. On the pumps, the end seals of the bellows of the bellows type are installed. All nodes and parts in contact with the product are made of stainless acid-resistant steel.
Advantages:
• Large performance for relatively small dimensions (reduction of the occupied area);
• The possibility of vertical performance, which improves absorption conditions for complex products;
• The possibility of manufacturing with a heating shirt (p) ;
• simplicity in maintenance and operation, reliability and durability.
Technical characteristics of the gear pump SHNK15-2 (HRM-2) M1 (P):
Product temperature-up to +90 0 s
Productivity is regulated (mechanically)-0.25 ... 2.0 m 3 /hour
Supervision pressure - up to 0.2 MPa (2 atm.)
The number of revolutions of the rotor is 1000 rpm
electric motor:
Power -1.1 kW
The number of revolutions is 1,000 rpm
Voltage - 380 V
Diameter input/output of the product - D50/D50 DIN 11 851
Material of the prototype part of the pump - steel 12x18N10T and 14x17N2
The material of the bed is the nervous steel AISI304
Dimensional dimensions - 720 x 253 x 310 mm
Mass - 47 kg
