Vertical sectional pump for underground Installations in a mine on a support frame, multi -stage, radial work wheels, single -circuit, flanges according to DIN or ANSI standards. Scope: for pumping condensate at power plants and power plants.
Review of technical data
q (50hz)
7.0-360, 0 (m³/h)
h (50hz)
6.0-310, 0 (m)
type of bearing
Encouraging
separation of the case
transverse (radial)
type of work wheel material (according to stand
Chromstahlguss, Graugusses
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
low voltage, high voltage < /span>
1. Type of working wheel
Single-flow < /span>
the number of inputs of the working wheel
Single-flow < /span>
other types of working wheels
Closed /radial
work wheel material (according to the standard E
Chromstahlguss, Graugusses
type of installation
supporting
type of coupling
directly < /span>
type of lubricant
Oil lubricant/lubricant of the pumped environment
the material of the pressure case (according to the standard
Grauguss, stahlgusses
max. Permissible fluid temperature
200.0 (° C) /span>
Pack of the pipe
To the side < /span>
maximal working pressure
Pn 40
installation of the unit
"Dry" settings
shaft material (according to the standard EN)
Kohlenstoffstahl, Chromstahl
material case material (according to the standard e
Stahlguss, Graugusses
material of the suction case (according to stand
Grauguss, stahlgusses
characteristics on absorption
Nonamovy. /span>
type of working wheel
Radial, closed
type of accession
Fill < /span>
type of step case
/span>
eclass
36410000, 36410101, 36410100 < /span>
installation position
Vertical < /span>
type of shaft seal
Salnic stuffing, end seal < /span>
the main areas of application
Energy < /span>
body material
carbon steel
max. Working pressure on the pressure sides
40.0 (Bar)
max. Work pressure from the side of the absorption
20.0 (Bar)
max. Driving power
400.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
3000.0 (1/min)
| q (50hz) | 7.0-360, 0 (m³/h) |
| h (50hz) | 6.0-310, 0 (m) |
| type of bearing | Encouraging |
| separation of the case | transverse (radial) |
| type of work wheel material (according to stand | Chromstahlguss, Graugusses |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | low voltage, high voltage < /span> |
| 1. Type of working wheel | Single-flow < /span> |
| the number of inputs of the working wheel | Single-flow < /span> |
| other types of working wheels | Closed /radial |
| work wheel material (according to the standard E | Chromstahlguss, Graugusses |
| type of installation | supporting |
| type of coupling | directly < /span> |
| type of lubricant | Oil lubricant/lubricant of the pumped environment |
| the material of the pressure case (according to the standard | Grauguss, stahlgusses |
| max. Permissible fluid temperature | 200.0 (° C) /span> |
| Pack of the pipe | To the side < /span> |
| maximal working pressure | Pn 40 |
| installation of the unit | "Dry" settings |
| shaft material (according to the standard EN) | Kohlenstoffstahl, Chromstahl |
| material case material (according to the standard e | Stahlguss, Graugusses |
| material of the suction case (according to stand | Grauguss, stahlgusses |
| characteristics on absorption | Nonamovy. /span> |
| type of working wheel | Radial, closed |
| type of accession | Fill < /span> |
| type of step case | /span> |
| eclass | 36410000, 36410101, 36410100 < /span> |
| installation position | Vertical < /span> |
| type of shaft seal | Salnic stuffing, end seal < /span> |
| the main areas of application | Energy < /span> |
| body material | carbon steel |
| max. Working pressure on the pressure sides | 40.0 (Bar) |
| max. Work pressure from the side of the absorption | 20.0 (Bar) |
| max. Driving power | 400.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 3000.0 (1/min) |
