The pump is bar

The pump is bar

Pumper Barlings of the Insert Rham

Inserted Step Deep pumps consist of a precision metal plunger and a thick-walled cylinder with an ani standard (ani American Oil Institute) and Technology of the Company.

At the request of the customer, the pumps are equipped (paid additionally):

  • Castle supports both according to the standard of ani and according to the Standard OST 26-16-06-86;
  • With a protective valve from the flow of mechanical tramps when the pump stops into the pump;
  • The lower filter to protect the pump from large (Ø & gt; 3 mm) mechanical particles that accidentally hit the well.

Pumper Trush THM

Pipe stands of high precision pumping with metal plunger and thick-walled cylinder are equipped Castle casting according to the standard of Ani (American Oil Institute) and are manufactured using the company's technology

TNM type pump is recommended for wells with difficult pumping conditions. The pump’s cylinder is equipped with two appliances pipe and installed as part of the NKT. The possibility of a plunger exit out from each end of the cylinder leads to a uniform wear of the cylinder and minimizes the sand entering the gap between the plunger and the cylinder.

Pumps of the TNM type are characterized by the maximum ratio of the internal diameter of the cylinder to the NCT, which allows them to pump more fluids compared to inserting pumps, which can descend into the TCT of the same diameter.

Disadvantages of the pump type of TNM - since the cylinder is a continuation of the NCT column, to replace it, you need to raise the entire column. Pumps with a passing diameter of 44 and 57 mm and a length of 3,500 to 5000 mm are offered.

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

The pumps have the following characteristics:
Diameter

Ø27 mm (20-106rham)

Ø32 mm (20-125 rham)

Ø38 mm (25-150 rham)

Ø44 mm (25-175 rham)

Ø57 mm (25-225 RHAM)

Plunger's stroke length nominal 3500 mm or any up to 5000 mm
Cylinder length 4300 mm or more up to 6000 mm
Plunger length 1200 mm
Pressure 2200 m
Cylinder thick -walled, internal chrome
Plunger Metal spraying
APPLICATIONS identical for couplings like ms of carvings of rods
The length of the pump with a plunger's course is 3500 mm 6000-6100 mm
Weight (plunger 3500 mm) 45-60 kg

The pump is equipped with two extensors of 600 mm;