Pump with a voluminous housing for a horizontal or vertical installation, with a non-pressure (F), single-channel (e), multi-channel (k) or diagonal working wheel with one blade (D), a discharge flange according to the standards of DIN and ANSI. 74, 74); Font-Family: Frutiger, Helvetica, Arial, Sans-Serif; Font-Size: 18px; Vertical-align: Inherit; "> Atex-compatible version is available.
Review of technical data
Q (50 Hz)
10.0-10 000.0 (m³/h) < /span>
H (50 Hz)
2.0-115.0 (m)
Type of bearing
rolling bearings
Partition
radially split
Drive frequency
50 Hz/60 Hz
Type of drive
electric engine
Drive voltage
low voltage, high voltage
The number of records of the working wheel
one-time
Workpoint material (EN Standard)
1.4517, Jl 1040, Jn 3029
Type of installation
long communication
Type of clutch
jack/belt drive, straight, float switch, bubbler system
Type of lubricant
consistent lubricant
Maximum. acceptable fluid temperature
70.0 (° С)
The position of the nozzle
The end of absorption
Maximum working pressure
pn16
Drawn up design
yes
The location of the pumping installation
dry set
Val material (EN standard)
1.4021, 1.4462
Distribution characteristics
non-grouping
Type of case
Volunter
Type of the working wheel
a single-channel work wheel, a free flow work wheel, closed, radial, multi-lobed, open
Type of connection
flange
Building material (EN standard)
Jl 1040
Purpose of eclass
36410101, 36410103
Free passage
280.0 (mm)
Mounting position
horizontal or vertical
Type of shaft seal
Mechanical seal, oilcoper stuffing
The main applications
Industrial and technological engineering, wastewater/wastewater
Building material
cast iron
Maximum pressure on the bumping side
10.0 (bar)
The maximum drive rating
710.0 (kW)
Type of installation
stationary
The maximum speed of rotation
2900.0 (1/min)
| Q (50 Hz) |
10.0-10 000.0 (m³/h) < /span>
|
H (50 Hz) |
2.0-115.0 (m) |
Type of bearing |
rolling bearings |
Partition
|
radially split |
Drive frequency
|
50 Hz/60 Hz |
Type of drive |
electric engine |
Drive voltage
|
low voltage, high voltage |
The number of records of the working wheel |
one-time |
Workpoint material (EN Standard)
|
1.4517, Jl 1040, Jn 3029 |
Type of installation
|
long communication |
Type of clutch |
jack/belt drive, straight, float switch, bubbler system
|
Type of lubricant |
consistent lubricant
|
Maximum. acceptable fluid temperature |
70.0 (° С) |
The position of the nozzle |
The end of absorption
|
Maximum working pressure
|
pn16 |
Drawn up design
|
yes |
The location of the pumping installation |
dry set |
Val material (EN standard) |
1.4021, 1.4462 |
Distribution characteristics |
non-grouping |
Type of case |
Volunter |
Type of the working wheel |
a single-channel work wheel, a free flow work wheel, closed, radial, multi-lobed, open
|
Type of connection
|
flange |
Building material (EN standard) |
Jl 1040 |
Purpose of eclass |
36410101, 36410103 |
Free passage
|
280.0 (mm) |
Mounting position |
horizontal or vertical |
Type of shaft seal |
Mechanical seal, oilcoper stuffing |
The main applications |
Industrial and technological engineering, wastewater/wastewater |
Building material
|
cast iron |
Maximum pressure on the bumping side
|
10.0 (bar) |
The maximum drive rating |
710.0 (kW) |
Type of installation
|
stationary |
The maximum speed of rotation
|
2900.0 (1/min)
| |
