Design features
• The TKF series is designed to print non-aggressive liquids that do not contain large solid particles.
• these are single-stage pumps, and they can be disconnected without moving the engine or pump, if necessary, using a coupling connected to the engine.
">
• The total sizes of the snail comply with the standard TS EN 733.
• absorbing and discharge flanges comply with the standard TS EN 1092-2/PN 16.
• The TKF series uses a closed impeller that has balancing holes between the blades to minimize axial loads and is balanced by dynamic loads.
• Soft seal is used to compile the shaft. The shaft seal can also be equipped with a mechanical seal on request.
• Thanks to its design, the wheel bearings and shaft seal can be easily replaced if necessary.
• All working wheels are balanced in accordance with ISO 1940 Grade 6.3.
• Direction of the pump rotation; This is clockwise from the engine.
Fields of application
|
|
metallurgical industry
|
| 
marine
|
| 
power stations
|
| 
food industry
|
| 
|
| 
Chemical industry
|
| 
Oil industry
|
| 
water supply and cleaning < /font>
|
| 
agricultural irrigation
|
| 
Fire fighting systems
| |
| The minimum profitability index < /font> | Mei ≥ 0.4 and Mei ≥ 0.7 (EU 547/2012) | ||||||
| Stream | up to 1750 m³ / h | ||||||
| delivery height |
up to 105 m < /font>
|
Wrap
|
up to 3600 rpm |
operating temperature
|
from -10 ° C to +140 ° C |
body pressure
|
10-16 bar |
|
