Purpose:
- The hydraulic pumps convert the mechanical energy of rotation of the shaft into the hydraulic energy of the flow of the working fluid.
- The hydraulic pumps are designed to work in closed hydrofabre mobile installations.
Design:
- Axial piston pumps with an inclined puck
- Introductory dimensions in accordance with the standards of DIN / ISO / SAE
The pumps have built -in in the back cover:
- Netting pump and a lock valve
- Two back-subject valves
Types of Management:
- Servo management proportional
- The electrical management is proportional (12, 24V)
- Discrete electrical management (12, 24V)
- Distributive hydraulic control
- Hydraduate proportional to without feedback
Tandemics:
- 13 options for installing additional pumps in tandem to the base are presented
Options:
- The filter in the pressure line of the recharge pump, the filter is part of the pump
- cut -off valve
- The sensor of the neutral position of the servo leverage
| Products | Working volume | Pressure | Note |
| 416.0 Episode |
28 cm 3 /about
56 cm 3 /about
71 cm 3 /about
90 cm 3 /about
112 cm 3 /about
125 cm 3 /about
|
45 MPa | |
| 416.1 series |
71 cm 3 /about
90 cm 3 /about
112 cm 3 /about
|
||
| 416.3 Episode |
71 cm 3 /about
90 cm 3 /about
112 cm 3 /about
|
Analogs NP-70, NP-90, NP-112 |
