Vertical pump with a tubular case, Single -stage, with an axial propeller performed by technology, always a clean blade that does not require maintenance of the shaft bearings from the Residur® material. With a floor or underground pressure nozzle, flanges according to DIN or ANSI standards, the supporting plate is mounted on a pressure knee or a drive lamp. Scope: for sprinkling and drainage, pumping stations for mixed liquids, to protect water and prevent emergency situations, for pumping drains that do not contain fibrous impurities, and active silt in drain purification systems.
Review of technical data
q (50hz)
290.0-9,000 , 0 (m³/h)
h (50hz)
0.5-10, 10, 10, 10 0 (m)
type of bearing
Sliding undergrowth
separation of the case
transverse (radial)
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of drive
Elector < /span>
voltage of the drive engine
Low voltage
the number of inputs of the working wheel
Single-flow < /span>
type of installation
supporting
type of coupling
directly < /span>
type of lubricant
Lubrication of the pumped environment
max. Permissible fluid temperature
60.0 (° C) /span>
maximal working pressure
Pn 10
installation of the unit
"Wet" installations
characteristics on absorption
Nonamovy. /span>
type of case
Tubular case
type of working wheel
Oso, propeller
type of accession
Fill < /span>
eclass
36410000, 36410106, 36410100 < /span>
max. Free passage
170.0 (mm)
installation position
Vertical < /span>
type of shaft seal
Salnic stuffing
the main areas of application
Water water, water supply
body material
Ni-resistant, chromnickel steel , carbon steel
max. Driving power
320.0 (KW)
type of installation
Stationary < /span>
max. rotation frequency
1500.0 (1/min)
| q (50hz) | 290.0-9,000 , 0 (m³/h) |
| h (50hz) | 0.5-10, 10, 10, 10 0 (m) |
| type of bearing | Sliding undergrowth |
| separation of the case | transverse (radial) |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of drive | Elector < /span> |
| voltage of the drive engine | Low voltage |
| the number of inputs of the working wheel | Single-flow < /span> |
| type of installation | supporting |
| type of coupling | directly < /span> |
| type of lubricant | Lubrication of the pumped environment |
| max. Permissible fluid temperature | 60.0 (° C) /span> |
| maximal working pressure | Pn 10 |
| installation of the unit | "Wet" installations |
| characteristics on absorption | Nonamovy. /span> |
| type of case | Tubular case |
| type of working wheel | Oso, propeller |
| type of accession | Fill < /span> |
| eclass | 36410000, 36410106, 36410100 < /span> |
| max. Free passage | 170.0 (mm) |
| installation position | Vertical < /span> |
| type of shaft seal | Salnic stuffing |
| the main areas of application | Water water, water supply |
| body material | Ni-resistant, chromnickel steel , carbon steel |
| max. Driving power | 320.0 (KW) |
| type of installation | Stationary < /span> |
| max. rotation frequency | 1500.0 (1/min) |
