Vertical tubular pump with a mixed stream propeller. Event of the pump With a bell or a suction knee, a design with a drawer is possible, the exhaust nozzle is located above or under the floor, there are flanges in accordance with the standards of DIN or ANSI.
Review of technical data
Q (50 Hz)
5000.0-65 000.0 (m³/h) < /span>
H (50 Hz)
12.0-25.0 (m)
Type of bearing
rolling element and sliding bearings
Partition
radially split
Drive frequency
50 Hz/60 Hz
Type of drive
electric engine
Drive voltage
low voltage, high voltage
The number of records of the working wheel
one-time
Type of installation
long communication
Type of clutch
gear, direct
Type of lubricant
Oil/lubrication of the product
Maximum. acceptable fluid temperature
80.0 (° С)
Maximum working pressure
Pn 6, Pn 9
The location of the pumping installation
Sukhoi installed, well soaked
Distribution characteristics
non-grouping
Type of case
tubular casing
Type of the working wheel
Working Wheel of a mixed flow, propeller
Type of connection
flange
Classification UNSPSC
4015150300
Purpose of eclass
36410000, 36410106, 36410100
Mounting position
vertical
Type of shaft seal
Mechanical seal, oilcoper stuffing
The main applications
energy
Building material
Steel Duplex, chromium-nickel steel, carbon steel
Type of installation
stationary
The maximum speed of rotation
990.0 (1/min)
| Q (50 Hz) |
5000.0-65 000.0 (m³/h) < /span>
|
H (50 Hz) |
12.0-25.0 (m) |
Type of bearing |
rolling element and sliding bearings |
Partition
|
radially split |
Drive frequency
|
50 Hz/60 Hz |
Type of drive |
electric engine |
Drive voltage
|
low voltage, high voltage |
The number of records of the working wheel |
one-time |
Type of installation
|
long communication |
Type of clutch |
gear, direct |
Type of lubricant |
Oil/lubrication of the product
|
Maximum. acceptable fluid temperature |
80.0 (° С) |
Maximum working pressure
|
Pn 6, Pn 9 |
The location of the pumping installation |
Sukhoi installed, well soaked |
Distribution characteristics |
non-grouping |
Type of case |
tubular casing |
Type of the working wheel |
Working Wheel of a mixed flow, propeller |
Type of connection
|
flange |
Classification UNSPSC |
4015150300 |
Purpose of eclass |
36410000, 36410106, 36410100
|
Mounting position |
vertical |
Type of shaft seal |
Mechanical seal, oilcoper stuffing |
The main applications |
energy |
Building material
|
Steel Duplex, chromium-nickel steel, carbon steel
|
Type of installation
|
stationary |
The maximum speed of rotation
|
990.0 (1/min)
| |
