The ONVP-DR series pumps are designed for mobile pumping of fluid and low-orch liquids from flasks, barrels or other containers. The units of this series belong to the type of screw semi -loading pumps, but unlike the ONVP series they have a drive from ordinary household electric drill, and therefore they have small weight, power from the 220V network, as well as the ability to connect to the onboard network of a car (12V) via an inverter. All this makes them almost completely autonomous and convenient to operate. Advantages:
- The ability to install any electrodele
- Small weight
- The ability to connect to the on -board network of the car
- Simplicity in maintenance and operation
ONVP (from 0 , 3 m3/h to 10 m3/h)
Convenient and simple to use screw pumps for pumping viscous materials from various containers (barrels, flasks, bags) in mobile conditions.
Advantages of pumping (barrel) screw pumps of the ONVP series:
- mobility and ease of operation;
- have a minimum effect on the pumped product (number of rotor revolutions (screw) from 50 to 750 rpm);
- at the request of the customer, the performance of pumps with a smooth supply of a frequency converter is possible.
- create high pressure (up to 6 atm);
- brand and composition of the rubber mixture of the clip (stator) is determined by the type of pumped product.
- the absence of valves in the running part of the pump;
- pumping viscous products with inclusions, including abrasive;
- the operation of the pump without pulsation;
- high absorption;
- ease of maintenance and operation, reliability and durability.
table Technical characteristics submersible (barrel) screw pumps of the ONVP series :
Additional designations of the pump executions:
about -sitative blowing of the electric motor for working at frequencies of 10 ... 35 Hz
emergency -frequency converter for changing the performance of the pump
Output -milk clutch, CLAMP connection, flanges, "Christmas tree" fitting under the hose
ONVPF-Dr-Dri-Submissive screw pumps
(With an electric or pneumatic drive)
ONVPF1-MAKITA6408
Technical characteristics of the pump:
Productivity-up to 1.5 m3/h ± 10%
Dressing pressure-up to 0.1 MPa (10 m)
The number of revolutions is 2500 rpm
Electric motor:
Power -0.53 kW
Voltage-220 V
Pipe diameter, mm
-suction-25 mm
-Supporting-39.5 mm
The pump length is 1040 mm (consistent with the customer) < Br Style = "Padding: 0px; Margin: 0px; Color: RGB (54, 54, 54); Font-Family: Segoe UI, Sans-Serif; Font-Size: 14px;" />
Pump width -90 mm
Height-300 mm
Mass-7.1 kg
All the details of the pump contacting with the product are made of stainless steel. Span>
ONVPF2-MAKITA DS4011
Technical characteristics of the pump:
Productivity-up to 1.5 m3/h ± 10%
Upermine pressure-up to 0.2 MPa (20 m)
The number of revolutions is 600 rpm
Electric motor:
Power -0.75 kW
Voltage-220 V
Pipe diameter, mm
-Hyproke-51 mm
-Supervisor-50 mm
The pump length is 750 mm (consistent with the customer) < Br Style = "Padding: 0px; Margin: 0px; Color: RGB (54, 54, 54); Font-Family: Segoe UI, Sans-Serif; Font-Size: 14px;" />
The pump width is -120 mm
Mass-8.5 kg
All the details of the pump contacting with the product are made of stainless steel. Span>
Advantages of drilling screw pumps of ONVPF-DR:
- Mobile!
- Light!
- productive!
- convenient in operation!
- with a drive from an electric drill (220V) or pneumatic or a battery drill, as well as the on -board network of a car (12V)!
- Reliable assistant for small and medium -sized businesses!
