NCC pumps-designed for pumping oil from oil pipelines, pits, containers.
Design
NKS type pump is horizontal, console, single -stage with axial supply of a pumped environment. The pressure pipe is directed vertically upwards. The connection of the pipes to the pipelines is flange. Rotor supports are two rolling bearings located in the high part of the case. Lubrication of bearings is consistent. Rubber cuffs are used as the end seal of the shaft.
parameters of the pumped environment
| oil | |||||
| temperature, o with | - 5 ... + 80 | ||||
| Kinematic viscosity, mm²/s (SST) | 300x10 -6 (300) | ||||
| The mass fraction of mechanical impurities, %, no more than | 0.05 | ||||
| maximum size of solid particles, mm | 0.2 | ||||
| oil products | |||||
| temperature, o with | - 29 ... + 50 | ||||
| Kinematic viscosity, mm²/s (SST) |
0.2x10 -6 -40x10 -6 (0.2-40) |
||||
| brand | feed, m³/h | pump pressure (differential), kgf/cm² | suction height, m | pressure, m | rotation frequency, rph |
| NKS 220-16 | 220 | 2.3 | 7 | 16 | 1500 |
