-Axual-piston-piston motors unregulated with an inclined unit type MN 56/32 are used in volumetric hydraulic drives of machines and assemblies in the modes of an unregulated pump or hydraulic motor.
The pump is designed to convert the mechanical energy of the drive shaft into hydraulic energy flow. working fluid.
The hydraulic fluid transforms the hydraulic energy of the flow of working fluid to the mechanical energy of rotation O. : Justify; Text-indent: 15px; outline: None! Important; " />
Pumping Motors are made with a helmet of the shaft and various outputs of the shaft ends and various options for execution of the rear case.
Execution with a reversing of the shaft rotation applies to hydraulic motors, and execution right (left) rotation-to pumps.
| Name of the parameter | the value | |
| pump | motor | |
| 3 | ||
| nominal | 56 ± 1.5 | 56 ± 1.5 |
| Rotation frequency, with -1 (rpm): | ||
| nominal | 25 (1500) | 33.3 (2000) |
| maximum | 33.3 (2000) | 58.3 (3500) |
| minimum | 3.3 (200) | 0.16 (10) |
| feed, l/min | ||
| nominal, no less | 80 -2 | |
| consumption, l/min, nominal no more | 117.8 +3.2 | |
| Pressure on the output, MPa, (KGS/cm 2 ) | ||
| nominal | 32 (320) | |
| maximum | 40 (400) | 20 (200) |
| Pressure at the input, MPa, (KGS/cm 2 ) | ||
| nominal | 32 (320) | |
| maximum | 1.6 (16) | 40 (400) |
| minimum for closed schemes | 0.4 (4) | |
| minimal (absolute) | ||
| for open schemes | 0.08 (0.8) | |
| Pressure drop, MPa (kgf/cm 2 ) | ||
| nominal | 32 (320) | |
| Drainage pressure, MPa (kgf/cm 2 ) | ||
| maximum | 0.2 (2) | 0.2 (2) |
| feed coefficient, % | 95 | |
| hydromechanical efficiency, % | 92 | |
| efficiency, % | 90 | 90 |
| mass (without working fluid), kg | 20 | 20 |
| nominal power, kW, | ||
| consumed, no more than | 48,8 +1.2 | |
| Effective, no less | 53.7 -1.4 | |
| torque, n · m, | ||
| nominal no less | 262 -7 | |
