Pump-axial-piston-piston adjustable types MGP112/32m with proportional hydraulic regulation are used in volumetric hydraulic drives of machines and assemblies in the regimes of the adjustable pump or hydraulic motor.
The pump is designed to convert the mechanical energy of rotation of the drive shaft into the variable energy in terms of working fluid flow (in a closed scheme).
The hydraulic engine is designed to drive actuators requiring unaccountable control of the rotation frequency.
The beginning of the regulation of the working volume is from the maximum (negative management).
Recommended oil grades: VMGZ TU38.101479, MGE-46V TU 38.001347, TNK hydraulics HLP 32, 46, 68 TU38.301-41-180-01, LUKOIL geyser ST 22, 32, 46 TS 0253-011-7934251- 2008.
| Name of the parameter | Value | |
| Pump | Motor | |
| Working volume | ||
| nominal (vnom.), cm 3 | 112 | 112 |
| Minimum (VMIN), cm 3 | 32 | 32 |
| Rotation frequency, with -1 (rpm) | ||
| nominal (at vnom) | 25 (1500) | 25 (1500) |
| Maximum (at VNOM) | 33.3 (2000) | 50 (3000) |
| maximum (at vmin) | - | 66.7 (4000) |
| Minimum (at VNOM) | 3.3 (200) | 0.8 (50) |
| Feed, l/min | ||
| nominal, no less | 159.6 -4.8 | |
| Minimum | 40 | |
| Nominal consumption, l/min, no more | 182.6 | |
| Consumption in the control line, l/min | 0.2 | 0.2 |
| Output pressure, MPa (kgf/cm 2 ) | ||
| nominal | 32 (320) | |
| maximum | 40 (400) | 20 (200) |
| The pressure at the entrance is nominal, MPa (kgf/cm 2 ) | 32 (320) | |
| Maximum, MPa (kgf/cm 2 ) | 1.6 (16) | 40 (400) |
| Nominal pressure drop, MPa (KGS/cm 2 ) | - | 32 (320) |
| The pressure on the beginning of regulation, MPa (kgf/cm 2 ) | 0.6 ÷ 1.0 | 0.6 ÷ 1.0 |
| Maximum drainage pressure, MPa | 0.2 | 0.2 |
| Nominal torque, n · m | - | 524 -16 |
| Nominal power, kW | ||
| consumed, no more | 97.6 +2.9 | |
| effective, no less | 80.7 -2.4 | |
| Feed factor, % | 95 | |
| Hydromechanical efficiency, %, no less | 92 | |
| Efficiency, %, no less | 90 | 90 |
| Mass (without working fluid), kg | 58 | 58 |
