Description < /span>
Vertical pump with a ballpoint building, Radial working wheels, single -circuit, one/three -stage. Designed for high pressure and temperatures in the suction line. Integrated electric motor with wet rotor according to VDE specifications. The bearings are lubricated by the pumped environment, so the oil supply system is not required. Constructive execution according to technical conditions for blood vessels, asme or IBR.
Scope
circulation of overheated water in boilers forced circulation, forced supply and combined ultra -high pressure boilers, tower -type solar power plants.
Review of technical data
q (50hz)
0.0-7,000 , 0 (m³/h)
h (50hz)
0.0-300, 0 (m)
type of bearing
Sliding undergrowth
the frequency of the drive engine
50 Hz /60 Hz < /span>
type of lubricant
lubrication of the pumped environment
max. Permissible fluid temperature
425.0 (° C) < /span>
type of case
Ballic corps
installation position
Vertical < /span>
the main areas of application
Energy < /span>
max. Working pressure on the pressure sides
400.0 (BAR)
max. rotation frequency
3600.0 (1/min)
| q (50hz) | 0.0-7,000 , 0 (m³/h) |
| h (50hz) | 0.0-300, 0 (m) |
| type of bearing | Sliding undergrowth |
| the frequency of the drive engine | 50 Hz /60 Hz < /span> |
| type of lubricant | lubrication of the pumped environment |
| max. Permissible fluid temperature | 425.0 (° C) < /span> |
| type of case | Ballic corps |
| installation position | Vertical < /span> |
| the main areas of application | Energy < /span> |
| max. Working pressure on the pressure sides | 400.0 (BAR) |
| max. rotation frequency | 3600.0 (1/min) |
