Pump Kml

Pump Kml

Designed for pumping drinking water and industrial-economic water with a content of mechanical impurities of not more than 0.1 % in volume and size not more than 0.2mm, with a temperature of 0 ° C to +105 ° C, as well as other liquids similar to water in density, viscosity and chemical activity. Shaft seal: the end is single. The pressure at the input of not more than 8 kgf/cm 2 . The running part of the pumps is made of gray cast iron.

Electric pumps are installed on pipelines (in line) and attached to the body flanges. There is a variant of installation of electric pumps on a special support.

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review

Request for

No. Electric pump brand Feed, q (min, max), m. Kub./H Ples, n (max, min), m ∆H, m, additional Rotation frequency, rpm. NN power power, kW at ρ = 1000 kg/m3 Engine power, NED., KW Mass aggregate, kg Dimensional dimensions, lhbhhh, mm Note
p/n
1 KML 50-125/2 12.5 20 2.5 2900 1.05 2.2 46/50* 425x260x482 H = 532*
(8-15) (23-18)
2 KML 50-125A/2 12.5 15 2.5 2900 1 1.5 46/50* 425x260x482 H = 532*
(8-15) (18-15)
3 KML 65-125/2 25 (15-27) 20 3 2900 1.89 2.2 45/50* 475x275x475 H = 532*
(22-19)
4 KML 65-160/2 25 32 3 2900 3.35 5.5 70.5/74.5* 475x295x540 H = 565*
(15-32) (35-31)
5 KML 65-160A/2 25 26 3 2900 2.9 4 70.5/74.5* 475x290x540 H = 565*
(15-32) (28-24)
6 KML 65-160b/2 25 20 3 2900 2.3 3 70.5/74.5 475x295x540 H = 565*
(15-32) (22-18)
7 KML 80-160/2 50 32 4.3 2900 6.05 7.5 102/105* 525x305x659 H = 694*
(30-57) (35-28)
8 KML 80-160a/2 50 26 4.3 2900 5 7.5 102/105* 525x305x659 H = 694*
(30-57) (31-24)
9 KML 80-160b/2 50 20 4.3 2900 3.9 7.5 102/105* 525x305x659 H = 694*
(30-57) (26-18)
10 KML 80-200/2 60 45 3.5 2900 13.3 15 176/180* 525x350x850 H = 900*
(45-75) (46-42)
11 KML 100-160/2 80 26 4.5 2900 8.6 11 140/145* 550x350x745 H = 795
(65-100) (28-22)