Pump Km:
Unlike pumps of type “K”, the KM monoblock pumps have one drawback - replacing the standard electric motor with a smaller power aggregate necessary after the wrap of the working wheel is difficult: it is required to carry out additional maintenance.
.designations (for example, km 50-32-125a/2-5-U3):
- Km - horizontal console monoblock pump
- 50 - diameter of the input pipe, mm (80, 65, 100, 150, 200)
- 32 - diameter of the output pipe, mm (50, 80, 65, 125, 150)
- 125 - nominal diameter of the working wheel, mm (160, 200, 250, 315, 400)
- A-the symbol of the working wheel with a turn that ensures the operation of the unit in the middle part of the “Q-H” field
- 2 - a symbol of the number of revolutions of the electric engine, the index "2" at n = 2900 rpm, index "4" at n = 1450 rpm
- 5 - single end seal
- U3-climatic execution and category of placement during operation according to GOST 15150-69. P - a firewriter with a soft stuffed oil seal
designations (for example, km 160/20-5-U3):
- 160-feed, m 3 /h
- 20 - pressure, m
A wide range of characteristics (the pressure varies from 14 to 85 m, feed-from 8 to 400 m < /span> 3 /h, power-from 1.5 to 90 kW) allows you to choose the necessary pump for various conditions and areas of application. Our pumps have rotation frequencies of 1,500 and 3000 revolutions per minute. The pumps of the KM series (monoblock) differ in that they require additional technological operations when replacing the standard electric motor with an electric motor with a reduced power necessary after the wheel turn.
| Pump brand | SUMM M3/h | Ples, m | Power, kW | Rotation frequency, rpm | Mass | Dimensions | The diameter of the input pipe | The diameter of the output pipe |
| Km 40-32-180/2-5 | 10 | 45 | 3 | 3000 | 50 | 440x290x345 | 40 | 32 |
