The Control Centrifugal pump type "K" is normally absorbing, horizontal pump equipped with a standard electric motor and is connected to the pump through a fist coupling, which is used for supply or pumping fluids under stationary conditions. In our case, we offer pumps, the housings and working organs of which are made of food stainless chromium -grinder 12x18N10T, which allows you to greatly expand the spectrum of pumped liquid with chemically active components. Sucked fluid: food and non -food products, oil products, chemically not aggressive liquids for steel AISI 321 (12x18N10T). These electrical pumps are actively used in dozens of various areas and industries: food, oil, chemical, pharmaceutical, fire extinguishing system, mining-processing, agricultural, housing and communal, heating, ventilation and air conditioning and so on. A design feature of km pumps from a similar purpose is that they are collected from leaf rolling steel with a thickness of 3 mm and cooked with argon -dodgy welding.
The equipment by an electric motor of Italian, Ukrainian, Russian, Belarusian production. For hazardous industries, the pump is equipped with an explosion -proof electric motor.
The pumps are tested in accordance with GOST 6134-2007.
The pump resource up to 80,000 hours
Warranty up to 2 years
K-65-50-125 (140)
Form - 60 m3/hour.
Pressure - 20 meters.
Electric motor - 220/380, 5.5 kW, 3000 vol./Min.
Temperature -from -40 to +120 ° C. (up to +300 ° C on order)
Density - from 500 to 1850 kg/m3.
The viscosity of the pumped fluid up to 200
Maximum pressure at the input of 8 kg/m3.
Mechanical end seal, a pair of friction on the choice of Car/Sic/NBR, Sic/Sic/EPDM, Sic/Sic/Viton. (on order double end seal)
The running part is made of steel 12x18N10T (food stainless steel).
K-65-50-125 (120)
Form - 60 m3/hour.
Pressure - 10 meters.
Electric motor - 220/380, 4 kW, 3000 vol./Min.
Temperature -from -40 to +120 ° C. (up to +300 ° C on order)
Density - from 500 to 1850 kg/m3.
The viscosity of the pumped fluid up to 200
Maximum pressure at the input of 8 kg/m3.
Mechanical end seal, a pair of friction on the choice of Car/Sic/NBR, Sic/Sic/EPDM, Sic/Sic/Viton. (on order double end seal)
The running part is made of steel 12x18N10T (food stainless steel).
