Pump hmm

Pump hmm

Electric pump KhM32-20-125K-centrifugal, horizontal, monoblock-designed to pump chemically active and neutral liquids with a density of not more than 1500 kg/m3 containing solid inclusions up to 0.2 mm in size, the volumetric concentration of which does not exceed 0.1%. Kinematic viscosity-no more than 30x10 -6 m2/s.
Pressure at the entrance to the electric pump not more than 0.35 MPa (3.5 kgf/cm2). The temperature of the pumped fluid is from 233 to 393 K (from -40 to +120 s).
The seal of the electric pump-a single end. Family: Tahoma, Arial, Helvetica, Sans-Serif; " /> Material of the details of the prototype part
-Chromonical Steel 12x18N9TL-"K"
- chromium-nickelmolibdenum steel 12x18n12Mztl- "e"
- Chromolmolmolmolibdeno-High Steel 07KHN25MDTL- "and".

b>

  • Chemical,
  • Pharmaceutical,
  • Energy,
  • Mechanical engineering.

Passed liquids:

  • Chemical and technical active liquids
  • In the pumped fluid, the content of short -fiber and solid non -abrasive inclusions is allowed up to 0.1 % by mass, the size of solid inclusions up to 0.2mm.,
  • density of not more than 1.35 g/cm3,
  • kinematic viscosity of not more than 30 sons.,
  • The temperature of the pumped liquid from minus 30 to plus 100 ° C.

Type of structure:

  • The flowing part is made of high -strength chromium steel 12x18N9TL, which increases the wear resistance of the pump,
  • The technological system of end seal and the system of hydraulic unloading of the axial force that significantly increase the life of the pump.
  • Pumps are made on the basis of unprofitable electric motors, when used in explosive rooms - on the basis of explosion -proof electric motors (SIG).
  • The permissible cavitation reserve is not more than 4.5 m.,
    Type of climatic performance U3

Size

pump

feed,

m 3 /h

pressure,

m

Allow the cavitation. reserve, m,

no more

speed of rotation,

with -1 (rpm)

engine power,

kW

mass of the unit,

kg

density, t/m3 density, t/m3
up to 1.3 up to 1.85 up to 1.3 up to 1.85

hmm32-20-125

3.15

25

3.0

48 (2900)

1.1

27.5

hmm32-20-125a

3.15

20

3.0

48 (2900)

1.1

27.5

hmm/20 6 20 2.0 48 (2900) 1.5 2.2 33 36

Technical characteristics:

Pump brand Nomin.
Submission,
m3/h 		Nomin.
Napro,
M 		Power
engine,
kW 		Dimensions
Without containers,
mm 		Mass
Without containers,
kg
Hmm 50-32-200K
Hmm 50-32-200k (with the engine. SIG) 		15 45 7.5 543x323x348 50
78
Pump brand Nomin.
Submission,
m3/h 		Nomin.
Napro,
M 		Power
engine,
kW 		Dimensions
Without containers,
mm 		Mass
Without containers,
kg
Hmm 80-50-200K
Hmm 80-50-200k (with the engine. SIG) 		50 50 22 764x400x460 220
260
">
the pump brand input, mm Output, mm Form, M 3 /h Ples, M rotation frequency El. engine, kW
Hmm 1.5/10k-0.55/2 20 20 1.5 10 2900 0.55
Hmm 1.5/15k-0.55/2 20 20 1.5 15 2900 0.55
Hmm 1.5/20k-0.75/2 32 32 1.5 20 2900 0.75
Hmm 3.5/10k-0.55/2 20 20

Write a review

Note: HTML is not translated!
   
Bad           Good
0 reviews / Write a review